EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanics and Failure Mechanisms of Rigid–Flexible 3D-Printed FRP Miura-Ori Structures

Zhiyu Qiao, Jitao Liu, Minghao Fan, Haifei Zhuang iD, Xiangyu Wang, Jiaying Xu, Peng Wang iD, Shaofeng Qin iD, Teng Wang iD, Weiwen Li iD

Materials · 28.05.2026 · 19 (11) · 2293

DOI: 10.3390/ma19112293 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.05.2026. Verfasst von Zhiyu Qiao und 9 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, College of Civil and Transportation Engineering, Shenzhen University …. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Young S & T Talent Support programme of Guangdong Provincial Association for Science and Technology, Guangdong Provincial Department of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The integration of multi-material 3D printing with origami engineering offers a promising avenue for deployable structures, but weak interfacial bonding between rigid and flexible phases remains a key limitation. This study first proposed four distinct hinge designs (enclosed, interlaced, inserted, and interlocked) for Miura-ori architectures, and subsequently investigated their mechanical behaviors with further elucidation of stress-transfer efficiency and interfacial failure modes under static tensile or compressive loading. Research outcomes identified the 5.0 mm interlaced hinge as the optimal interface design, improving stress distribution at the rigid–flexible interface and suppressing premature debonding. Notably, the dominant failure mode shifted from interfacial separation to ductile fracture within a TPU elastomer. Further research proves that increasing the embedment depth of the interlaced hinge from 1.0 mm to 5.0 mm can significantly increase fracture elongation from 100.8% to 342.4% while maintaining a stable peak tensile strength of approximately 12.5 MPa. At the structural scale, dual-material printed Miura-ori architecture exhibits better mechanical performance than single-material printed spatial counterparts (5163 N vs. 4019 N in compressive capacity, 18.7 mm vs. 8.0 mm in fracture elongation). These findings provide valuable insights into high-performance deployable structure design based on multi-material additive manufacturing.

Schlagwörter

Stichwörter der Autor:innen

3D printingFRP Miura-ori structuredual-material hingefailure mechanism

Autor:innen und Institutionen

  • Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, College of Civil and Transportation Engineering, Shenzhen University & China National Key Laboratory of Green and Long-Life Road Engineerin…
  • CSCEC Road and Bridge Group Co., Ltd., Shijiazhuang 050011, China.
  • Department of Civil Engineering, The Hong Kong University of Science and Technology, Hong Kong, China.
  • Department of Civil Engineering, The University of Hong Kong, Hong Kong, China.

ORCID-Profile: Haifei Zhuang, Peng Wang, Shaofeng Qin, Teng Wang, Weiwen Li

Förderung

  • National Natural Science Foundation of China
  • Young S & T Talent Support programme of Guangdong Provincial Association for Science and Technology
  • Guangdong Provincial Department of Science and Technology
  • Start-up Project at Shenzhen University
  • Start-up Project for 'High-end and Shortage' Talents (Category C) in Shenzhen
  • Guangdong-Hong Kong Technology Cooperation Funding Scheme
  • LingChuang Research Project of China National Nuclear Corporation
  • Young S & T Talent Support programme of Guangdong Provincial Association for Science and Technology

Zitieren

APA

Qiao, Z., Liu, J., Fan, M., Zhuang, H., Wang, X., Xu, J., Wang, P., Qin, S., Wang, T., & Li, W. (2026). Mechanics and Failure Mechanisms of Rigid–Flexible 3D-Printed FRP Miura-Ori Structures. Materials, 19(11), 2293. https://doi.org/10.3390/ma19112293

Vancouver

Qiao Z, Liu J, Fan M, Zhuang H, Wang X, Xu J, et al. Mechanics and Failure Mechanisms of Rigid–Flexible 3D-Printed FRP Miura-Ori Structures. Materials. 2026;19(11):2293. doi:10.3390/ma19112293

BibTeX
@article{Qiao2026,
  author = {Qiao, Zhiyu and Liu, Jitao and Fan, Minghao and Zhuang, Haifei and Wang, Xiangyu and Xu, Jiaying and Wang, Peng and Qin, Shaofeng and Wang, Teng and Li, Weiwen},
  title = {Mechanics and Failure Mechanisms of Rigid–Flexible 3D-Printed FRP Miura-Ori Structures},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2293},
  doi = {10.3390/ma19112293}
}
Kostenlos starten →