Effect of Crack Geometry on Tensile Deformation and Local Strain Evolution in X46 Pipeline Steel Thin-Walled Tubes
Materials · 27.05.2026 · 19 (11) · 2265
DOI: 10.3390/ma19112265 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 27.05.2026. Verfasst von Hongqiao Yan und 3 weiteren Autor:innen. Beteiligte Einrichtung: National Center of Technology Innovation for Digita Construction, Huazhong University of Science and Technology, Wuhan 430074, China. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNPC, CNPC Youth Science and Technology Special Project.
Abstract (Originalsprache)
To investigate the effect of crack geometry on tensile deformation and strain localization in X46 pipeline steel thin-walled tubes, uniaxial tensile tests were conducted on specimens containing prefabricated cracks with different sizes, types, and orientations, and full-field strain evolution was characterized by digital image correlation. The material exhibited a favorable strength-ductility balance, with an average yield strength of 324 MPa, an ultimate tensile strength of 553.5 MPa, and an elongation of 27%. Non-cracked specimens showed three deformation stages: uniform deformation, strain localization, and necking instability. In cracked specimens, strain localization initiated at the crack tips and expanded with increasing displacement. Larger cracks significantly intensified crack-tip strain concentration and enlarged the high-strain zone. Through-wall cracks caused stronger localization and earlier local instability than surface cracks because of the loss of wall continuity, whereas small surface cracks had a limited effect on the final localization path. Crack orientation also affected deformation behavior, and the 45° inclined crack produced the most severe X-shaped localization under combined normal and shear stresses.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Center of Technology Innovation for Digita Construction, Huazhong University of Science and Technology, Wuhan 430074, China.
- School of Civil and Hydraulic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
- CNPC Research Institute of Safety & Environment Technology, Beijing 102206, China.
ORCID-Profile: Molin Su
Förderung
- CNPC
- CNPC Youth Science and Technology Special Project
Zitieren
APA
Yan, H., Su, M., Luo, F., & Jiang, R. (2026). Effect of Crack Geometry on Tensile Deformation and Local Strain Evolution in X46 Pipeline Steel Thin-Walled Tubes. Materials, 19(11), 2265. https://doi.org/10.3390/ma19112265
Vancouver
Yan H, Su M, Luo F, Jiang R. Effect of Crack Geometry on Tensile Deformation and Local Strain Evolution in X46 Pipeline Steel Thin-Walled Tubes. Materials. 2026;19(11):2265. doi:10.3390/ma19112265
BibTeX
@article{Yan2026,
author = {Yan, Hongqiao and Su, Molin and Luo, Fangwei and Jiang, Ruijing},
title = {Effect of Crack Geometry on Tensile Deformation and Local Strain Evolution in X46 Pipeline Steel Thin-Walled Tubes},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2265},
doi = {10.3390/ma19112265}
}
EUVIMED