EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Thermal Properties of AlN-SiC Composite Ceramics Fabricated by In Situ Reaction Hot-Pressing Sintering

Xiaoqing Zhao, Bin Wang, Ping He, Shuaihang Qiu iD, Xiaoshuo Zhang, Weizhou Xin, Jinbao Pang, Run Huang iD

Materials · 27.05.2026 · 19 (11) · 2263

DOI: 10.3390/ma19112263 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.05.2026. Verfasst von Xiaoqing Zhao und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan 232001, China. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui University of Science and Technology, National Natural Science Foundation of China, State Key Laboratory of Advanced Ceramics.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Simultaneously achieving high densification, excellent mechanical properties, and high thermal conductivity remains challenging for aluminum nitride–silicon carbide (AlN-SiC) composites. In this study, fine-grained AlN-SiC composite ceramics were fabricated via in situ reaction hot pressing with the addition of small amounts of silicon (Si) and carbon (C). At an optimal sintering temperature of 1800 °C, the primary phase composition consisted of AlN, SiC and residual graphite, with an average AlN grain size of 0.94 μm. The Si additive melted and wetted the AlN matrix via capillary action, thereby providing sufficient kinetic driving force for densification. Meanwhile, the C additive not only removed oxygen impurities and purified grain boundaries but also reacted in situ with liquid Si to form SiC. The uniformly dispersed SiC particles inhibited the abnormal growth of AlN grains via the grain boundary pinning effect. Consequently, the relative density, flexural strength, and Vickers hardness of the obtained AlN-SiC ceramics reached 99.08%, 365 MPa and 22.58 GPa, respectively. At room temperature, the composite exhibited a thermal conductivity of 66 W/(m·K) and a thermal diffusivity of 32.6 mm2/s. This superior thermal performance is attributed to the purified grain boundaries, uniform SiC distribution, high densification, and tightly bonded SiC/AlN interfaces, which result in weak phonon interfacial scattering.

Schlagwörter

Stichwörter der Autor:innen

AlN-SiC compositesin situ reaction hot pressingmechanical propertiesthermal conductivity

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan 232001, China.
  • State Key Laboratory of Advanced Ceramics, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China.
  • Anhui Industrial Generic Technology Research Center for New Materials from Coal-Based Solid Wastes, Huainan 232001, China.
  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China.

ORCID-Profile: Shuaihang Qiu, Run Huang

Förderung

  • Anhui University of Science and Technology
  • National Natural Science Foundation of China
  • State Key Laboratory of Advanced Ceramics
  • Anhui Industrial Generic Technology Research Center for New Materials from Coal-based Solid Wastes
  • Anhui Provincial Department of Education
  • Scientific Research Foundation for High level Talents of Anhui University of Science and Technology
  • Opening Project of State Key Laboratory of Advanced Ceramics
  • University Synergy Innovation Program of Anhui Province

Zitieren

APA

Zhao, X., Wang, B., He, P., Qiu, S., Zhang, X., Xin, W., Pang, J., & Huang, R. (2026). Mechanical and Thermal Properties of AlN-SiC Composite Ceramics Fabricated by In Situ Reaction Hot-Pressing Sintering. Materials, 19(11), 2263. https://doi.org/10.3390/ma19112263

Vancouver

Zhao X, Wang B, He P, Qiu S, Zhang X, Xin W, et al. Mechanical and Thermal Properties of AlN-SiC Composite Ceramics Fabricated by In Situ Reaction Hot-Pressing Sintering. Materials. 2026;19(11):2263. doi:10.3390/ma19112263

BibTeX
@article{Zhao2026,
  author = {Zhao, Xiaoqing and Wang, Bin and He, Ping and Qiu, Shuaihang and Zhang, Xiaoshuo and Xin, Weizhou and Pang, Jinbao and Huang, Run},
  title = {Mechanical and Thermal Properties of AlN-SiC Composite Ceramics Fabricated by In Situ Reaction Hot-Pressing Sintering},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2263},
  doi = {10.3390/ma19112263}
}
Kostenlos starten →