EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Optimization of Ferrochrome Production Using Pre-Reduced Chromite Pellets

Yerbolat Makhambetov, Ainash Akmanova, Armat Zhakan iD, Aibar Myrzagaliyev iD, Dastan Aubakirov, Zhadiger Sadyk iD, Zhalgas Saulebek

Materials · 25.05.2026 · 19 (11) · 2225

DOI: 10.3390/ma19112225 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.05.2026. Verfasst von Yerbolat Makhambetov und 6 weiteren Autor:innen. Beteiligte Einrichtung: Chemical-Metallurgical Institute Named After Zh. Abishev, Karaganda 100030, Kazakhstan. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This research was funded by the Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan, Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the production of high-carbon ferrochrome (HCFeCr) using pre-reduced chromite pellets. Chromite ore from the Kempirsai deposit, semicoke as a reducing agent, and activated bentonite as a binder were used for pellet preparation. Pellets with a size of 12–14 mm were produced and subjected to reduction roasting at 1400 °C for 1–3 h. The results showed that increasing the roasting time promoted chromite reduction and increased the chromium metallization degree. After 3 h of roasting, the chromium metallization degree reached 43.93%. SEM analysis confirmed the formation of metallized chromium-containing phases and a porous structure favorable for subsequent smelting. Smelting experiments were carried out in a 0.1 MVA ore-thermal furnace using pre-reduced pellets. Stable furnace operation, satisfactory slag fluidity, and effective separation of metal and slag were observed. The obtained high-carbon ferrochrome contained 68.92 wt.% Cr, 1.54 wt.% Si, and 7.11 wt.% C. Chromium recovery into the alloy reached 92.17%, while the slag contained 2.14 wt.% Cr2O3. The specific electric energy consumption during experimental smelting was 4648.1 kWh/t of ferrochrome. Recalculation to industrial conditions showed an expected energy consumption of 3132.76 kWh/t, confirming the potential of pre-reduced chromite pellets for energy-efficient ferrochrome production.

Schlagwörter

Stichwörter der Autor:innen

chromite pelletsdegree of metallizationenergy efficiencyhigh-carbon ferrochromepre-reductionrotary kilnsemi-coke

Autor:innen und Institutionen

  • Chemical-Metallurgical Institute Named After Zh. Abishev, Karaganda 100030, Kazakhstan.
  • Department of Nanotechnology and Metallurgy, Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan.
  • ERG Research and Engineering Center LLP, Astana 010000, Kazakhstan.

ORCID-Profile: Armat Zhakan, Aibar Myrzagaliyev, Zhadiger Sadyk

Förderung

  • This research was funded by the Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan
  • Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Makhambetov, Y., Akmanova, A., Zhakan, A., Myrzagaliyev, A., Aubakirov, D., Sadyk, Z., & Saulebek, Z. (2026). Development and Optimization of Ferrochrome Production Using Pre-Reduced Chromite Pellets. Materials, 19(11), 2225. https://doi.org/10.3390/ma19112225

Vancouver

Makhambetov Y, Akmanova A, Zhakan A, Myrzagaliyev A, Aubakirov D, Sadyk Z, et al. Development and Optimization of Ferrochrome Production Using Pre-Reduced Chromite Pellets. Materials. 2026;19(11):2225. doi:10.3390/ma19112225

BibTeX
@article{Makhambetov2026,
  author = {Makhambetov, Yerbolat and Akmanova, Ainash and Zhakan, Armat and Myrzagaliyev, Aibar and Aubakirov, Dastan and Sadyk, Zhadiger and Saulebek, Zhalgas},
  title = {Development and Optimization of Ferrochrome Production Using Pre-Reduced Chromite Pellets},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2225},
  doi = {10.3390/ma19112225}
}
Kostenlos starten →