EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Factorial Optimization of Secondary Annealing Parameters for Enhanced Magnetic Performance in M4 Grain-Oriented Electrical Steel Toroidal Cores

Alma Lilia Moreno-Ríos iD, Luis Adrián Zúñiga-Avilés iD, José Martín Herrera-Ramírez iD, Caleb Carreño-Gallardo iD

Materials · 23.05.2026 · 19 (11) · 2203

DOI: 10.3390/ma19112203 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.05.2026. Verfasst von Alma Lilia Moreno-Ríos und 3 weiteren Autor:innen. Beteiligte Einrichtung: Posgrado CIATEQ AC, Centro de Tecnología Avanzada, Lerma de Villada 52004, Estado de Mexico, Mexico. Die Arbeit nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Grain-oriented (GO) silicon steel cores in low-voltage current transformers suffer magnetic degradation from residual stress and increased dislocation density during slitting and winding. This study addresses the gap in systematic optimization of secondary annealing on assembled toroidal cores using a 32 full-factorial design varying temperature (650, 850, 1050 °C) and holding time (60, 90, 120 min) on M4 grade cores. Results showed temperature is the dominant factor, while holding time exhibits a synergistic non-linear effect. The optimal condition (850 °C, 90 min) reduced specific losses from 0.85 W/kg to 0.43 W/kg (49% reduction). Mechanistic analysis confirmed this improvement is driven by complete primary recrystallization (equiaxed grains ~50–60 µm), dislocation annihilation (~10 HV hardness reduction), and reinforcement of the Goss texture ({110} ). SEM, EDS, and ICP-OES demonstrated that the Carlite coating remained dimensionally (1.67–1.83 µm) and chemically stable, with beneficial decarburization. Temperatures above 850 °C caused magnetic deterioration due to excessive grain growth. These results provide a validated, industrial framework for recovering magnetic efficiency in wound toroidal cores without compromising coating integrity.

Schlagwörter

Stichwörter der Autor:innen

Goss texturefactorial designgrain-oriented electrical steel (M4)insulating coatingsecondary annealingtransformer core losses

Autor:innen und Institutionen

  • Posgrado CIATEQ AC, Centro de Tecnología Avanzada, Lerma de Villada 52004, Estado de Mexico, Mexico.
  • Facultad de Medicina, Universidad Autónoma del Estado de México, Av. Paseo Tollocan, Moderna de la Cruz, Toluca 50180, Estado de Mexico, Mexico.
  • Centro de Investigación en Materiales Avanzados, S.C. (CIMAV), Av. Miguel de Cervantes #120, Complejo Industrial Chihuahua, Chihuahua 31136, Chihuahua, Mexico.

ORCID-Profile: Alma Lilia Moreno-Ríos, Luis Adrián Zúñiga-Avilés, José Martín Herrera-Ramírez, Caleb Carreño-Gallardo

Zitieren

APA

Moreno-Ríos, A. L., Zúñiga-Avilés, L. A., Herrera-Ramírez, J. M., & Carreño-Gallardo, C. (2026). Factorial Optimization of Secondary Annealing Parameters for Enhanced Magnetic Performance in M4 Grain-Oriented Electrical Steel Toroidal Cores. Materials, 19(11), 2203. https://doi.org/10.3390/ma19112203

Vancouver

Moreno-Ríos AL, Zúñiga-Avilés LA, Herrera-Ramírez JM, Carreño-Gallardo C. Factorial Optimization of Secondary Annealing Parameters for Enhanced Magnetic Performance in M4 Grain-Oriented Electrical Steel Toroidal Cores. Materials. 2026;19(11):2203. doi:10.3390/ma19112203

BibTeX
@article{MorenoRos2026,
  author = {Moreno-Ríos, Alma Lilia and Zúñiga-Avilés, Luis Adrián and Herrera-Ramírez, José Martín and Carreño-Gallardo, Caleb},
  title = {Factorial Optimization of Secondary Annealing Parameters for Enhanced Magnetic Performance in M4 Grain-Oriented Electrical Steel Toroidal Cores},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2203},
  doi = {10.3390/ma19112203}
}
Kostenlos starten →