EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and Bonding Strength of Sn-Decorated MWCNT-Reinforced Sn-3.0Ag-0.5Cu Composite Solder Joints: Reflow vs. IPL Soldering

DongGil Kang, HoGyeong Seong, JaeJun Yoon, MinJae Sung, JinHo Joo, JeongWon Yoon iD, SeungBoo Jung

Materials · 22.05.2026 · 19 (11) · 2188

DOI: 10.3390/ma19112188 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.05.2026. Verfasst von DongGil Kang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Advanced Materials Science & Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 16419, Republic of Korea. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Science and ICT, Korea government.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid advancement of microelectronic packaging has created a critical need for lead-free solder joints with enhanced mechanical and thermal reliability. This study introduces a novel approach to improve Sn-3.0Ag-0.5Cu (SAC 305) solder joints by incorporating Sn-decorated multiwalled carbon nanotubes (MWCNTs). To address the poor wettability and agglomeration of carbon nanotubes in molten solder, MWCNTs were functionalized and uniformly coated with ~70 nm Sn nanoparticles via electroless plating. Soldering was conducted using intense pulsed light (IPL), a rapid, energy-efficient heat source, and was compared with conventional reflow soldering. The study systematically investigated the influence of MWCNT content (0, 0.05, 0.1, and 0.2 wt.%) and IPL soldering conditions with pulse numbers: 27–36 for shear tests, and 30–42 for drop impact tests. IPL processing produced thinner Cu6Sn5 IMC layers than reflow soldering due to its shorter duration. The composite solder with 0.1 wt.% Sn-decorated MWCNTs achieved the highest density, superior thermal dissipation in LED packages, and maximum shear strength and drop impact resistance. These results demonstrate that optimizing Sn-MWCNT content, especially at 0.1 wt.%, and precisely controlling IPL energy can yield highly reliable, mechanically robust, and thermally efficient lead-free solder joints for advanced electronic packaging.

Schlagwörter

Stichwörter der Autor:innen

MWCNTSn nanoparticlesSn-3.0Ag-0.5Cuintense pulsed lightintermetallic compounds

Autor:innen und Institutionen

  • School of Advanced Materials Science & Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 16419, Republic of Korea.
  • Department of Semiconductor Convergence Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 16419, Republic of Korea.
  • School of Advanced Materials Science & Engineering, Chungbuk University, Chungdae-ro, Seowon-gu, Cheongju-si 28644, Republic of Korea.

ORCID-Profile: JeongWon Yoon

Förderung

  • National Research Foundation of Korea
  • Ministry of Science and ICT
  • Korea government

Zitieren

APA

Kang, D., Seong, H., Yoon, J., Sung, M., Joo, J., Yoon, J., & Jung, S. (2026). Fabrication and Bonding Strength of Sn-Decorated MWCNT-Reinforced Sn-3.0Ag-0.5Cu Composite Solder Joints: Reflow vs. IPL Soldering. Materials, 19(11), 2188. https://doi.org/10.3390/ma19112188

Vancouver

Kang D, Seong H, Yoon J, Sung M, Joo J, Yoon J, et al. Fabrication and Bonding Strength of Sn-Decorated MWCNT-Reinforced Sn-3.0Ag-0.5Cu Composite Solder Joints: Reflow vs. IPL Soldering. Materials. 2026;19(11):2188. doi:10.3390/ma19112188

BibTeX
@article{Kang2026,
  author = {Kang, DongGil and Seong, HoGyeong and Yoon, JaeJun and Sung, MinJae and Joo, JinHo and Yoon, JeongWon and Jung, SeungBoo},
  title = {Fabrication and Bonding Strength of Sn-Decorated MWCNT-Reinforced Sn-3.0Ag-0.5Cu Composite Solder Joints: Reflow vs. IPL Soldering},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2188},
  doi = {10.3390/ma19112188}
}
Kostenlos starten →