EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Drag Reduction of Ti6Al4V with Different Shaped Microstructures via Femtosecond Laser Processing

Mingwei Sun, Ying Wang, Jingying Li, Jinjun Wu

Materials · 22.05.2026 · 19 (11) · 2183

DOI: 10.3390/ma19112183 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.05.2026. Verfasst von Mingwei Sun und 3 weiteren Autor:innen. Beteiligte Einrichtung: China Academy of Machinery Science and Technology Group Co., Ltd., Beijing 100044, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Yunnan Provincial Department of Science and Technology Key R&D Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the aerodynamic performance of Ti6Al4V functional components, this paper systematically investigated the femtosecond laser processing technology for surface drag-reduction microstructures, aiming to fabricate high-performance microstructures. (1) V-shaped, U-shaped, and rectangular micro-grooves were designed based on the boundary layer theory, and their drag-reduction mechanisms were elucidated through CFD numerical simulations. The results indicate that the V-shaped groove achieves a peak drag-reduction rate of 13.1% at a dimensionless depth of h+ = 15 and an aspect ratio of 1, primarily due to the formation of a low-velocity zone and the suppression of turbulent bursts by secondary vortices. (2) Through single-factor experiments, the influence laws of femtosecond laser process parameters on the V-shaped groove were explored. (3) Regression prediction models for groove dimensions were established using the Response Surface Methodology (RSM) to optimize the processing parameters. Under the optimized conditions, high-quality V-shaped groove arrays with a width of 55.9 μm and a depth of 55.5 μm were successfully fabricated on the Ti6Al4V surface, characterized by high consistency and a minimal heat-affected zone. This research provides an effective technical solution for the precision manufacturing of high-performance drag-reduction structures on titanium alloy surfaces.

Schlagwörter

Stichwörter der Autor:innen

computational fluid dynamicsdrag reduction microstructurefemtosecond laser processingtitanium alloy

Autor:innen und Institutionen

  • China Academy of Machinery Science and Technology Group Co., Ltd., Beijing 100044, China.
  • Yanqi Lake Institute of Basic Manufacturing Technology Research Co., Ltd., Beijing 101400, China.
  • China Productivity Center for Machinery Co., Ltd., Beijing 100044, China.
  • Machinery Technology Development Co., Ltd., Beijing 100044, China.

Förderung

  • National Key Research and Development Program of China
  • Yunnan Provincial Department of Science and Technology Key R&D Program

Zitieren

APA

Sun, M., Wang, Y., Li, J., & Wu, J. (2026). Study on Drag Reduction of Ti6Al4V with Different Shaped Microstructures via Femtosecond Laser Processing. Materials, 19(11), 2183. https://doi.org/10.3390/ma19112183

Vancouver

Sun M, Wang Y, Li J, Wu J. Study on Drag Reduction of Ti6Al4V with Different Shaped Microstructures via Femtosecond Laser Processing. Materials. 2026;19(11):2183. doi:10.3390/ma19112183

BibTeX
@article{Sun2026,
  author = {Sun, Mingwei and Wang, Ying and Li, Jingying and Wu, Jinjun},
  title = {Study on Drag Reduction of Ti6Al4V with Different Shaped Microstructures via Femtosecond Laser Processing},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2183},
  doi = {10.3390/ma19112183}
}
Kostenlos starten →