EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydration and Microstructure Evolution of Acrylamide-Modified Tunnel Slag Mortar Under Various Curing Conditions

Dongkang Hu, Maosheng Ran, Yue Yu, Guo Yang, Xiang Gu, Nan Hu, Shuo Chen iD

Materials · 22.05.2026 · 19 (11) · 2179

DOI: 10.3390/ma19112179 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.05.2026. Verfasst von Dongkang Hu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Nantong Electric Power Design Institute Co., Ltd., Nantong 226000, China. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Grid Jiangsu Electric Power Co., Ltd. Provincial Managed Industry Science and Technology Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The preparation of tunnel slag mortar (TSM) represents a sustainable strategy to enhance the resource utilization efficiency of tunnel slag. Toughening TSM via the in situ polymerization of acrylamide (AM) is effective in mitigating the risk of cracking during service. However, the limited understanding of the temperature and humidity sensitivity of AM-modified TSM poses challenges in establishing optimal curing regimes. In this study, low-field nuclear magnetic resonance (LF-NMR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to systematically investigate the evolution of hydration kinetics, hydration products, pore structure, and micromorphology of AM-modified TSM under various curing conditions. The results indicate that AM incorporation retards early hydration but does not alter the types of hydration products. Increasing the curing temperature can alleviate this adverse effect, and a 3% AM dosage exhibits a stronger hydration-promoting effect at 40–60 °C. The efficacy of AM on pore refinement is highly environment-dependent: a 3% dosage yields optimal pore refinement at 20 °C, whereas high temperatures induce pore coarsening. Furthermore, compared to conventional TSM, AM-modified TSM exhibits higher sensitivity to curing humidity, underscoring that adequate moisture is critical for optimizing its pore structure.

Schlagwörter

Stichwörter der Autor:innen

acrylamidecuring conditionshydration processmicrostructuremortartunnel slag aggregate

Autor:innen und Institutionen

  • Nantong Electric Power Design Institute Co., Ltd., Nantong 226000, China.
  • State Grid Jiangsu Nantong Electric Power Co., Ltd., Nantong 226000, China.
  • College of Civil and Transportation Engineering, Hohai University, Nanjing 210098, China.

ORCID-Profile: Shuo Chen

Förderung

  • State Grid Jiangsu Electric Power Co., Ltd. Provincial Managed Industry Science and Technology Project

Zitieren

APA

Hu, D., Ran, M., Yu, Y., Yang, G., Gu, X., Hu, N., & Chen, S. (2026). Hydration and Microstructure Evolution of Acrylamide-Modified Tunnel Slag Mortar Under Various Curing Conditions. Materials, 19(11), 2179. https://doi.org/10.3390/ma19112179

Vancouver

Hu D, Ran M, Yu Y, Yang G, Gu X, Hu N, et al. Hydration and Microstructure Evolution of Acrylamide-Modified Tunnel Slag Mortar Under Various Curing Conditions. Materials. 2026;19(11):2179. doi:10.3390/ma19112179

BibTeX
@article{Hu2026,
  author = {Hu, Dongkang and Ran, Maosheng and Yu, Yue and Yang, Guo and Gu, Xiang and Hu, Nan and Chen, Shuo},
  title = {Hydration and Microstructure Evolution of Acrylamide-Modified Tunnel Slag Mortar Under Various Curing Conditions},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2179},
  doi = {10.3390/ma19112179}
}
Kostenlos starten →