EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Ni Element in Self-Shielded Flux-Cored Wires on the Microstructural and Mechanical Property Evolutions of X80 Pipeline Steel Girth Welds

Shujun Jia iD, Chengwu Cui, Chunliang Mao iD, Gang Liu, Qingyou Liu

Materials · 21.05.2026 · 19 (10) · 2162

DOI: 10.3390/ma19102162 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.05.2026. Verfasst von Shujun Jia und 4 weiteren Autor:innen. Beteiligte Einrichtung: Engineering Structural Steel Research Institute, Central Iron and Steel Research Institute Company Limited, Beijing 100081, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present work, eleven self-shielded flux-cored wires with nickel (Ni) contents ranging from 1.42 wt.% to 4.02 wt.% were designed for the semi-automatic welding of X80 pipeline steel. The effects of Ni on the microstructural evolution and mechanical properties of the weld metal were investigated. The results indicate that when the Ni content is below 2.06 wt.%, the microstructures of both the solidification zone and the inter-pass reheating zone are dominated by coarse granular bainite and martensite/austenite (M/A) constituents. As the Ni content increases from 2.06 wt.% to 3.73 wt.%, the microstructure transforms to fine lath bainite with M/A constituents characterized by low content, small size, and uniform distribution. When the Ni content reaches 3.73 wt.%, the microstructure becomes almost fully bainite. Furthermore, with increasing the Ni content, both the yield strength and tensile strength of the weld metal increase from ~600 MPa to ~700 MPa and from ~660 MPa to ~730 MPa, respectively. However, the impact energy at −20 °C of the weld metal initially increases and then decreases, reaching a peak of ~110 J with the lowest degree of dispersion at a Ni content of approximately 3.73 wt.%. When the Ni content exceeds 3.73 wt.%, the ductility decreases slightly. Further analyses indicate that the synergistic effects of Ni in refining the microstructure and reducing the activity coefficient and solubility of nitrogen (N) jointly contribute to the impact toughness of the weld metal.

Schlagwörter

Stichwörter der Autor:innen

N elementNi contentmechanical propertymicrostructureself-shielded flux-cored wire

Autor:innen und Institutionen

  • Engineering Structural Steel Research Institute, Central Iron and Steel Research Institute Company Limited, Beijing 100081, China.
  • China Petroleum Pipeline Research Institute Company Limited, Langfang 065000, China.

ORCID-Profile: Shujun Jia, Chunliang Mao

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Jia, S., Cui, C., Mao, C., Liu, G., & Liu, Q. (2026). Effect of Ni Element in Self-Shielded Flux-Cored Wires on the Microstructural and Mechanical Property Evolutions of X80 Pipeline Steel Girth Welds. Materials, 19(10), 2162. https://doi.org/10.3390/ma19102162

Vancouver

Jia S, Cui C, Mao C, Liu G, Liu Q. Effect of Ni Element in Self-Shielded Flux-Cored Wires on the Microstructural and Mechanical Property Evolutions of X80 Pipeline Steel Girth Welds. Materials. 2026;19(10):2162. doi:10.3390/ma19102162

BibTeX
@article{Jia2026,
  author = {Jia, Shujun and Cui, Chengwu and Mao, Chunliang and Liu, Gang and Liu, Qingyou},
  title = {Effect of Ni Element in Self-Shielded Flux-Cored Wires on the Microstructural and Mechanical Property Evolutions of X80 Pipeline Steel Girth Welds},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2162},
  doi = {10.3390/ma19102162}
}
Kostenlos starten →