EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Unraveling the Superior High-Temperature Oxidation Behavior of FeNiCuAl-Based High-Entropy Alloys: Roles of Cr, Co, and Mn Alloying Additions

Kai Ren, Xiaofei Gao, Rui Yang iD, Jianping Fu iD

Materials · 20.05.2026 · 19 (10) · 2152

DOI: 10.3390/ma19102152 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.05.2026. Verfasst von Kai Ren und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, North University of China, Taiyuan 030051, China. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: outh Scientific Research Projects of the Basic Research Program of Shanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes a novel synergistic design strategy to enhance the oxidation resistance of FeNiCuAl-based high-entropy alloys by integrating multi-element alloying (Cr-Co-Mn), trace Y modification, and laser-cladding-induced nanocrystallization. While the Base Alloy exhibited a mass gain of approximately 15 mg/cm2 after oxidation at 900 °C for 120 h, the addition of Cr2.5Co2.5Mn2.5 promoted the formation of a multilayered oxide scale (outer MnCr2O4/inner Al2O3), reducing the parabolic oxidation rate constant to 1.7 × 10−5 mg2·cm−4·s−1. The originality of this work lies in the coupling of compositional and microstructural engineering; further addition of 0.5 at.% Y decreased this constant to 1.7 × 10−6 mg2·cm−4·s−1—a three-order-of-magnitude reduction relative to the Base Alloy, while increasing the apparent oxidation activation energy to ~350 kJ/mol. After 100 thermal cycles at 1000 °C, the designed alloy showed a mass change of only 0.05 ± 0.02 mg/cm2, with its critical load and interfacial fracture energy reaching 78 N and 14.8 J/m2, respectively. Furthermore, the alloy retained a hardness of 310 HV, an elastic modulus of 135 GPa, and a tensile strength of 240 MPa at elevated temperature. These results demonstrate that the synergistic integration of chemical and structural optimization provides a new paradigm for designing low-cost, high-performance FeNiCuAl-based protective coatings.

Schlagwörter

Stichwörter der Autor:innen

high-entropy alloyshigh-temperature oxidationnanocrystallizationoxidation-resistant coating materialstrace yttrium doping

Autor:innen und Institutionen

  • School of Mechanical and Electrical Engineering, North University of China, Taiyuan 030051, China.

ORCID-Profile: Rui Yang, Jianping Fu

Förderung

  • outh Scientific Research Projects of the Basic Research Program of Shanxi Province

Zitieren

APA

Ren, K., Gao, X., Yang, R., & Fu, J. (2026). Unraveling the Superior High-Temperature Oxidation Behavior of FeNiCuAl-Based High-Entropy Alloys: Roles of Cr, Co, and Mn Alloying Additions. Materials, 19(10), 2152. https://doi.org/10.3390/ma19102152

Vancouver

Ren K, Gao X, Yang R, Fu J. Unraveling the Superior High-Temperature Oxidation Behavior of FeNiCuAl-Based High-Entropy Alloys: Roles of Cr, Co, and Mn Alloying Additions. Materials. 2026;19(10):2152. doi:10.3390/ma19102152

BibTeX
@article{Ren2026,
  author = {Ren, Kai and Gao, Xiaofei and Yang, Rui and Fu, Jianping},
  title = {Unraveling the Superior High-Temperature Oxidation Behavior of FeNiCuAl-Based High-Entropy Alloys: Roles of Cr, Co, and Mn Alloying Additions},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2152},
  doi = {10.3390/ma19102152}
}
Kostenlos starten →