EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Carbon Materials Derived from Waste Streams: From Processing Pathways to Structure–Property–Function Relationships

Sharif H Zein iD

Materials · 20.05.2026 · 19 (10) · 2146

DOI: 10.3390/ma19102146 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 20.05.2026. Verfasst von Sharif H Zein. Beteiligte Einrichtung: Faculty of Engineering, Sohar University, Sohar 311, Oman. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 249 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The accelerating generation of waste streams is observed globally. Spanning lignocellulosic biomass, plastic waste, sewage sludge, and industrial residues, this review presents both an urgent management challenge and a compelling materials opportunity. Carbon materials derived from these waste streams offer a sustainable route to functional carbons applicable in electrochemical energy storage, adsorption, heterogeneous catalysis, and high-temperature applications. Yet their rational design remains constrained by incomplete understanding of the relationships between feedstock composition, processing pathway, structural characteristics, and functional performance. This review provides an integrated analysis of waste-derived carbon materials from processing pathways to structure–property–function relationships. The principal feedstock categories are examined for their compositional characteristics and implications for carbon yield and structure. Five primary processing routes are assessed. The five routes examined are pyrolysis, hydrothermal carbonisation, physical and chemical activation, and microwave-assisted processing. They are assessed comparatively with emphasis on structural outcomes and governing parameters. The resulting structural characteristics are discussed. These are morphology, hierarchical pore architecture, surface chemistry, heteroatom doping, and crystallinity. They are discussed alongside their characterisation methods and known limitations as performance predictors. Structure–property relationships are examined quantitatively. Heteroatom-doped hierarchical porous carbons achieve 612 F/g specific capacitance. Turbostratic hard carbons deliver 450 mAh/g sodium storage with over 90% retention. Hierarchical porous carbons demonstrate CO2 uptake of 5.0 mmol/g and dye adsorption exceeding 9000 mg/g under optimised laboratory conditions; these values reflect individual studies and are not directly comparable across systems. Biomass-derived sulfonated carbon catalysts sustain biodiesel yields above 90% over multiple cycles. Challenges of feedstock variability, process scalability, environmental compliance, and economic feasibility are addressed, and machine learning-guided design, standardised characterisation methodology, and circular economy policy frameworks are identified as key enablers for translating laboratory performance into industrial reality.

Schlagwörter

Stichwörter der Autor:innen

electrochemical energy storagehierarchical porous carbonhydrothermal carbonisationpyrolysisstructure–property relationshipswaste valorisation policywaste-derived carbon materials

Autor:innen und Institutionen

  • Faculty of Engineering, Sohar University, Sohar 311, Oman.
  • Faculty of Science and Engineering, School of Engineering, University of Hull, Hull HU6 7RX, UK.

ORCID-Profile: Sharif H Zein

Zitieren

APA

Zein, S. H. (2026). Carbon Materials Derived from Waste Streams: From Processing Pathways to Structure–Property–Function Relationships. Materials, 19(10), 2146. https://doi.org/10.3390/ma19102146

Vancouver

Zein SH. Carbon Materials Derived from Waste Streams: From Processing Pathways to Structure–Property–Function Relationships. Materials. 2026;19(10):2146. doi:10.3390/ma19102146

BibTeX
@article{Zein2026,
  author = {Zein, Sharif H},
  title = {Carbon Materials Derived from Waste Streams: From Processing Pathways to Structure–Property–Function Relationships},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2146},
  doi = {10.3390/ma19102146}
}
Kostenlos starten →