EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improved Thermo-Hydraulic Stability and Boiling Heat Transfer Through a Novel Three-Layer Microchannel Heat Sink with 3/4 Open-Ring Pin Fin Arrays

Guangyao Liu, Can Ji, Zhigang Liu, Peter D Lund iD, Yeyao Liu, Fuqiang Xu, Shenglong Zhang, Cong Wang, Donghao Li

Materials · 20.05.2026 · 19 (10) · 2143

DOI: 10.3390/ma19102143 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.05.2026. Verfasst von Guangyao Liu und 8 weiteren Autor:innen. Beteiligte Einrichtung: Energy Research Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology of the People's Republic of China, Department of Science and Technology of Shandong Province, Jinan City Science and Technology Bureau.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study systematically investigated flow boiling characteristics within a novel three-layer microchannel heat sink with 3/4 open-ring pin fin arrays, designed for high-heat-flux thermal management of low-carbon metallurgical reactors. Two-phase flow regimes, pressure drop, and wall temperature responses were analyzed. To evaluate the impact of functional surface material properties on thermo-hydraulic behavior, a hydrophilic nano-coating modification was applied to the inner copper channel walls for comparison. Increasing the flow rate triggered a transition from a vapor-dominated confined slug flow to a liquid-dominated dispersed bubble flow, which effectively improved the thermo-hydraulic stability. Hydrophilic surface modification resulted in an average pressure drop reduction of 33% and significantly diminished the sensitivity of flow resistance to velocity variations. Through hydrophilic treatment, the localized vapor film effect at high velocities was suppressed, and temperature field homogenization was promoted, yielding a maximum convective heat transfer coefficient of 7760 W/(m2·°C), i.e., 72.9% enhancement over the baseline heat sink. The underlying mechanism is attributed to the formation of a stable near-wall thin liquid film and the promotion of high-frequency nucleate boiling. These results will be of high relevance for developing efficient cooling solutions for power electronics, thereby supporting the advancement of low-carbon metallurgical reactors.

Schlagwörter

Stichwörter der Autor:innen

flow boilingheat transfer enhancementhydrophilic surfacemicro pin finthree-layer microchannel

Autor:innen und Institutionen

  • Energy Research Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China.
  • School of Science, Aalto University, Puumiehenkuja 2, P.O. Box 15100, FI-00076 Espoo, Finland.

ORCID-Profile: Peter D Lund

Förderung

  • Ministry of Science and Technology of the People's Republic of China
  • Department of Science and Technology of Shandong Province
  • Jinan City Science and Technology Bureau
  • Qilu University of Technology
  • National Key Research and Development Program of China
  • Natural Science Foundation of Shandong Province
  • Key R&D Program of Shandong Province
  • Collaborative Innovation Project of Colleges in Jinan

Zitieren

APA

Liu, G., Ji, C., Liu, Z., Lund, P. D., Liu, Y., Xu, F., Zhang, S., Wang, C., & Li, D. (2026). Improved Thermo-Hydraulic Stability and Boiling Heat Transfer Through a Novel Three-Layer Microchannel Heat Sink with 3/4 Open-Ring Pin Fin Arrays. Materials, 19(10), 2143. https://doi.org/10.3390/ma19102143

Vancouver

Liu G, Ji C, Liu Z, Lund PD, Liu Y, Xu F, et al. Improved Thermo-Hydraulic Stability and Boiling Heat Transfer Through a Novel Three-Layer Microchannel Heat Sink with 3/4 Open-Ring Pin Fin Arrays. Materials. 2026;19(10):2143. doi:10.3390/ma19102143

BibTeX
@article{Liu2026,
  author = {Liu, Guangyao and Ji, Can and Liu, Zhigang and Lund, Peter D and Liu, Yeyao and Xu, Fuqiang and Zhang, Shenglong and Wang, Cong and Li, Donghao},
  title = {Improved Thermo-Hydraulic Stability and Boiling Heat Transfer Through a Novel Three-Layer Microchannel Heat Sink with 3/4 Open-Ring Pin Fin Arrays},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2143},
  doi = {10.3390/ma19102143}
}
Kostenlos starten →