EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study on the Process, Microstructure, and Properties of Laser Additive Manufacturing of Titanium Alloys

Xuqiang Kang, Bingqi Wang, Anguo Huang iD

Materials · 16.05.2026 · 19 (10) · 2104

DOI: 10.3390/ma19102104 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.05.2026. Verfasst von Xuqiang Kang und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Industry and Information Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To eliminate lack-of-fusion (LoF) defects at partition interfaces during laser powder bed fusion of titanium alloys, this study proposes a multi-layer, partitioned-scanning strategy with staggered interfaces. The strategy was optimized through an orthogonal experimental design focused on single-track morphology. Experimental results indicate that this approach effectively suppresses defects in quadrant-partitioned samples, significantly improving the relative density from 93.6% to 97.9%. In addition, the strategy markedly refines the microstructure and enhances microhardness. Mechanical testing confirms that the fabricated components achieve performance comparable to those produced by conventional continuous scanning.

Schlagwörter

Stichwörter der Autor:innen

laser additive manufacturingsection scanningtissue properties

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.

ORCID-Profile: Anguo Huang

Förderung

  • Ministry of Industry and Information Technology

Zitieren

APA

Kang, X., Wang, B., & Huang, A. (2026). A Study on the Process, Microstructure, and Properties of Laser Additive Manufacturing of Titanium Alloys. Materials, 19(10), 2104. https://doi.org/10.3390/ma19102104

Vancouver

Kang X, Wang B, Huang A. A Study on the Process, Microstructure, and Properties of Laser Additive Manufacturing of Titanium Alloys. Materials. 2026;19(10):2104. doi:10.3390/ma19102104

BibTeX
@article{Kang2026,
  author = {Kang, Xuqiang and Wang, Bingqi and Huang, Anguo},
  title = {A Study on the Process, Microstructure, and Properties of Laser Additive Manufacturing of Titanium Alloys},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2104},
  doi = {10.3390/ma19102104}
}
Kostenlos starten →