EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Simulation Study on the Temperature Rise Characteristics of Asphalt Pavement During Hot In-Place Recycling

Chuanyi Ma, Jizhe Zhang, Bokai Liu, Yuechao Zhao, Peng Zhou, Liting Yan, Zhanyong Yao, Weidong Cao

Materials · 16.05.2026 · 19 (10) · 2096

DOI: 10.3390/ma19102096 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.05.2026. Verfasst von Chuanyi Ma und 7 weiteren Autor:innen. Beteiligte Einrichtung: Shandong Hi-Speed Group Co., Ltd., Jinan 250098, China. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The heating efficiency of hot in-place recycling for asphalt pavements directly depends on parameters such as hot air temperature, hot air velocity, and heating machinery travel speed. However, the interactions among these parameters and their influence mechanism on deep-layer temperature remain unclear. In this study, a three-dimensional transient heat transfer model of an asphalt pavement was established to simulate the effects of different parameters under intermittent heating conditions, including hot air temperature, hot air velocity, and travel speed, on the pavement surface temperature and temperature at a depth of 4 cm. The results indicate that travel speed exhibits the most sensitive effect on temperature, with an absolute regression coefficient of 8.5 °C·min/m. A reduction of 0.5 m/min in travel speed increases the deep-layer temperature by approximately 4.25 °C. Every 50 °C increase in hot air temperature raises the deep-layer temperature by about 5.75 °C. The effect of hot air velocity on temperature is relatively small within the range of 12 to 14 m/s. The heat penetration efficiency increases monotonically as the hot air temperature and velocity increase or the travel speed decreases. This study reveals the quantitative relationship between heating parameters and temperature responses, providing a theoretical basis for parameter optimization in hot in-place recycling processes.

Schlagwörter

Stichwörter der Autor:innen

asphalt pavementheat penetration efficiencyheating parametershot in-place recyclingnumerical simulation

Autor:innen und Institutionen

  • Shandong Hi-Speed Group Co., Ltd., Jinan 250098, China.
  • School of Qilu Transportation, Shandong University, Jinan 250002, China.
  • Shandong Provincial Communications Planning and Design Institute Group Co., Ltd., Jinan 250101, China.
  • School of Materials Science and Engineering, University of Jinan, Jinan 250022, China.
  • Shandong Hi-Speed Dongying Development Co., Ltd., Dongying 257092, China.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Shandong Province

Zitieren

APA

Ma, C., Zhang, J., Liu, B., Zhao, Y., Zhou, P., Yan, L., Yao, Z., & Cao, W. (2026). Numerical Simulation Study on the Temperature Rise Characteristics of Asphalt Pavement During Hot In-Place Recycling. Materials, 19(10), 2096. https://doi.org/10.3390/ma19102096

Vancouver

Ma C, Zhang J, Liu B, Zhao Y, Zhou P, Yan L, et al. Numerical Simulation Study on the Temperature Rise Characteristics of Asphalt Pavement During Hot In-Place Recycling. Materials. 2026;19(10):2096. doi:10.3390/ma19102096

BibTeX
@article{Ma2026,
  author = {Ma, Chuanyi and Zhang, Jizhe and Liu, Bokai and Zhao, Yuechao and Zhou, Peng and Yan, Liting and Yao, Zhanyong and Cao, Weidong},
  title = {Numerical Simulation Study on the Temperature Rise Characteristics of Asphalt Pavement During Hot In-Place Recycling},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2096},
  doi = {10.3390/ma19102096}
}
Kostenlos starten →