EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bulk Versus Surface Regulation of Cyclic Superelasticity in LPBF-Fabricated NiTi Alloy

Yuye Yang, Tongbo Wei iD, Chenyu Su, Jia Wan, Xiaojia Nie iD, Jingjing Yang iD

Materials · 16.05.2026 · 19 (10) · 2092

DOI: 10.3390/ma19102092 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.05.2026. Verfasst von Yuye Yang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuits, Wuhan University, Wuhan 430072, China. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Hubei Provincial Natural Science Foundation of China-Young Scientist Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cyclic superelasticity in laser powder bed fusion (LPBF)-fabricated NiTi alloys is strongly influenced by the scale of structural regulation. While conventional post-processing strategies are typically interpreted from a microstructural perspective, the distinct roles of bulk and surface regulation in governing cyclic functional response remain unclear. In this study, heat treatment and laser shock peening (LSP) are employed as representative bulk and surface regulation routes, respectively, to systematically investigate their effects on phase transformation and cyclic superelasticity. The results reveal that heat treatment and LSP operate through fundamentally different regulation modes. Heat treatment acts as a bulk regulation route, reconstructing the overall microstructure, promoting precipitation (NiTi2 and Ni4Ti3), and modifying transformation pathways, which enhances recovery ratio but reduces recoverable strain. In contrast, LSP acts as a surface/subsurface regulation route, inducing gradient grain refinement and near-surface hardening while maintaining a B2-dominated matrix. As a result, the LSP-treated sample exhibits superior cyclic stability, with a stable recoverable strain of 9.93% and a superelastic strain of 5.10% after 10 cycles. These findings demonstrate that cyclic superelasticity is governed not only by phase constitution but also critically by the scale of structural regulation. This work provides a practical framework for selecting post-processing strategies to optimize functional performance in LPBF NiTi alloys.

Schlagwörter

Stichwörter der Autor:innen

NiTi alloyheat treatmentlaser powder bed fusionlaser shock peeningphase transformationsuperelasticity

Autor:innen und Institutionen

  • School of Integrated Circuits, Wuhan University, Wuhan 430072, China.
  • The Institute of Technological Sciences, Wuhan University, Wuhan 430072, China.
  • Naval University of Engineering, Wuhan 430033, China.

ORCID-Profile: Tongbo Wei, Xiaojia Nie, Jingjing Yang

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China
  • Hubei Provincial Natural Science Foundation of China-Young Scientist Fund

Zitieren

APA

Yang, Y., Wei, T., Su, C., Wan, J., Nie, X., & Yang, J. (2026). Bulk Versus Surface Regulation of Cyclic Superelasticity in LPBF-Fabricated NiTi Alloy. Materials, 19(10), 2092. https://doi.org/10.3390/ma19102092

Vancouver

Yang Y, Wei T, Su C, Wan J, Nie X, Yang J. Bulk Versus Surface Regulation of Cyclic Superelasticity in LPBF-Fabricated NiTi Alloy. Materials. 2026;19(10):2092. doi:10.3390/ma19102092

BibTeX
@article{Yang2026,
  author = {Yang, Yuye and Wei, Tongbo and Su, Chenyu and Wan, Jia and Nie, Xiaojia and Yang, Jingjing},
  title = {Bulk Versus Surface Regulation of Cyclic Superelasticity in LPBF-Fabricated NiTi Alloy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2092},
  doi = {10.3390/ma19102092}
}
Kostenlos starten →