EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cutting Performance of YG8 Cemented Carbide Tools with Microcapsule-Filled Surface Microtextures

Jianchi Zhou iD, Jiaying Shi, Yuxin Zhao, Peng Liu, Xianglong Meng, Hui Chen iD

Materials · 14.05.2026 · 19 (10) · 2052

DOI: 10.3390/ma19102052 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.05.2026. Verfasst von Jianchi Zhou und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Shandong Key Laboratory of CNC Machine Tool Functional Components, Qilu University of Technology (Shandong Academy …. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province, Projects of Shandong Province “Youth Innovation Science and Technology Support Plan”, Shandong Provincial Key Research and Development Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the dry cutting performance of YG8 cemented carbide tools, CaF2/[BMIM]PF6@PPSU solid–liquid dual-core microcapsules were incorporated into microtextures on the rake face, thereby constructing a microcapsule–microtexture composite self-lubricating tool system. Cutting experiments were conducted to systematically investigate the effects of microcapsule content and microtexture edge spacing on the cutting performance of the tools. The results indicate that optimal cutting performance is achieved at a microcapsule content of 20 wt.% and an edge spacing of 100 μm. Under these conditions, the tool embedded with dual-core microcapsules exhibited a main cutting force as low as 88.6 N, a cutting temperature of 237.8 °C, a machined surface roughness of 1.08 μm, and an extended cutting distance of 9497 m. Compared with the unlubricated tool, the main cutting force, axial force, and radial force decreased by approximately 40%, 45.6%, and 47.4%, respectively; the cutting temperature decreased by 43.9%, and the surface roughness was reduced by 24.5%. Micromorphological analysis reveals that, under optimal conditions, the TC2 tool effectively mitigates adhesive and delamination wear on both the rake and flank faces. Energy-dispersive spectroscopy (EDS) analysis demonstrates that the rupture of microcapsules releases two core materials, forming a stable solid–liquid biphasic lubricating film that effectively suppresses adhesive and abrasive wear.

Schlagwörter

Stichwörter der Autor:innen

cemented carbide toolsdry cuttingmicrotexturesself-lubricating microcapsules

Autor:innen und Institutionen

  • School of Mechanical Engineering, Shandong Key Laboratory of CNC Machine Tool Functional Components, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, China.
  • Shandong Institute of Mechanical Design and Research, Jinan 250031, China.
  • Department of Intelligent Manufacturing, Shandong Labor Vocational and Technical College, Jinan 250353, China.

ORCID-Profile: Jianchi Zhou, Hui Chen

Förderung

  • Natural Science Foundation of Shandong Province
  • Projects of Shandong Province “Youth Innovation Science and Technology Support Plan”
  • Shandong Provincial Key Research and Development Program
  • Major Innovation Project of Qilu University of Technology

Zitieren

APA

Zhou, J., Shi, J., Zhao, Y., Liu, P., Meng, X., & Chen, H. (2026). Cutting Performance of YG8 Cemented Carbide Tools with Microcapsule-Filled Surface Microtextures. Materials, 19(10), 2052. https://doi.org/10.3390/ma19102052

Vancouver

Zhou J, Shi J, Zhao Y, Liu P, Meng X, Chen H. Cutting Performance of YG8 Cemented Carbide Tools with Microcapsule-Filled Surface Microtextures. Materials. 2026;19(10):2052. doi:10.3390/ma19102052

BibTeX
@article{Zhou2026,
  author = {Zhou, Jianchi and Shi, Jiaying and Zhao, Yuxin and Liu, Peng and Meng, Xianglong and Chen, Hui},
  title = {Cutting Performance of YG8 Cemented Carbide Tools with Microcapsule-Filled Surface Microtextures},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2052},
  doi = {10.3390/ma19102052}
}
Kostenlos starten →