EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Graphene Oxide on Cement Hydration Products, Microstructure, and Mechanical Performance

Lounis Djenaoucine iD, Álvaro Picazo iD, Miguel Angel de la Rubia iD, Jaime C Gálvez iD, Amparo Moragues iD

Materials · 13.05.2026 · 19 (10) · 2037

DOI: 10.3390/ma19102037 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.05.2026. Verfasst von Lounis Djenaoucine und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering: Construction, School of Civil Engineering, Technical University of Madrid, C/Profesor Aranguren s/n, 28040 Madrid, S…. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the effects of graphene oxide (GO) on the hydration behaviour, microstructure, and mechanical properties of Portland cement-based materials. Cement pastes and mortars incorporating GO at dosages of 0.0005%, 0.005%, and 0.05% by weight of cement were analysed through thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDS), and mechanical strength testing. TGA results indicate that GO exerts a time-dependent influence on cement hydration. At early ages, GO slightly retards hydration, evidenced by lower C–S–H and CH content in GO-containing samples at 2 and 7 days, attributed to water adsorption by its oxygen-containing functional groups. At later curing ages (28–90 days), TGA results show greater C–S–H and CH weight losses in GO-modified samples compared to the reference, consistent with GO acting as a water reservoir and nucleation site. XRD and SEM results confirm that GO incorporation leads to a reduction in CH crystal size, a denser and more homogeneous microstructure, and fewer pores and microcracks. Mechanical tests revealed that GO contents of 0.0005% and 0.05% produced the most significant improvements, with increases of up to 9% in compressive strength and 16% in flexural strength at 90 days compared with the control specimens. In summary, the incorporation of low GO dosages effectively refines cement microstructure, enhances long-term hydration, and improves mechanical performance, demonstrating GO’s potential as a strength- and durability-enhancing nanomaterial for cementitious composites.

Schlagwörter

Stichwörter der Autor:innen

calcium hydroxide (CH)calcium silicate hydrate (C–S–H)cement pastedurability enhancementgraphene oxide (GO)hydration processmechanical propertiesmicrostructurenanomaterials

Autor:innen und Institutionen

  • Department of Civil Engineering: Construction, School of Civil Engineering, Technical University of Madrid, C/Profesor Aranguren s/n, 28040 Madrid, Spain.
  • Department of Building Technology, Superior Technical School of Building, Technical University of Madrid, Avda. Juan de Herrera, 6, 28040 Madrid, Spain.

ORCID-Profile: Lounis Djenaoucine, Álvaro Picazo, Miguel Angel de la Rubia, Jaime C Gálvez, Amparo Moragues

Zitieren

APA

Djenaoucine, L., Picazo, Á., de la Rubia, M. A., Gálvez, J. C., & Moragues, A. (2026). Influence of Graphene Oxide on Cement Hydration Products, Microstructure, and Mechanical Performance. Materials, 19(10), 2037. https://doi.org/10.3390/ma19102037

Vancouver

Djenaoucine L, Picazo Á, de la Rubia MA, Gálvez JC, Moragues A. Influence of Graphene Oxide on Cement Hydration Products, Microstructure, and Mechanical Performance. Materials. 2026;19(10):2037. doi:10.3390/ma19102037

BibTeX
@article{Djenaoucine2026,
  author = {Djenaoucine, Lounis and Picazo, Álvaro and de la Rubia, Miguel Angel and Gálvez, Jaime C and Moragues, Amparo},
  title = {Influence of Graphene Oxide on Cement Hydration Products, Microstructure, and Mechanical Performance},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2037},
  doi = {10.3390/ma19102037}
}
Kostenlos starten →