EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Polyurethane Adhesive Formulation on Shear Performance of Maritime Pine Cross-Laminated Timber Under Dry and Moist Exposure Conditions

Annie Cavalcante iD, Jorge M Martins iD, Margarida Lopes de Almeida iD, Cláudio Henrique Soares Del Menezzi iD, Luísa Hora de Carvalho iD

Materials · 13.05.2026 · 19 (10) · 2030

DOI: 10.3390/ma19102030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.05.2026. Verfasst von Annie Cavalcante und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Forest Engineering, Faculty of Technology, University of Brasília, Brasília 70919-970, Brazil. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, Coordenação de Aperfeicoamento de Pessoal de Nível Superior, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The construction sector’s drive for sustainability has increased the use of Cross-Laminated Timber (CLT), yet its structural reliability is governed by the integrity of the adhesive bond line. This study evaluates the influence of three one-component polyurethane (PUR) formulations (R1, R2, R3) on the adhesion performance of maritime pine CLT. To isolate adhesive-related effects, lamellas were mechanically classified by modulus of elasticity (MOE) and randomly allocated within stiffness classes. Adhesive characterization through ABES, FTIR, and DSC revealed that R3 exhibited slower cure kinetics (t0 = 5482 s) but higher thermal stability. Mechanical testing showed that all formulations developed structurally effective dry bonds with shear strengths exceeding 7.1 MPa, with R3 achieving significantly higher dry shear and interlaminar strength. However, 24 h water immersion caused a catastrophic strength reduction exceeding 95% across all formulations, shifting the failure mode from the wood substrate to the adhesive layer. DSC analysis identified glass transition temperatures between 28 °C and 32 °C, which are consistent with the potential for moisture-induced plasticization near service temperatures. These results indicate that while slower-curing formulations like R3 enhance bond quality in dense softwoods due to improved interphase formation, all evaluated PUR systems showed significant vulnerability to saturated conditions, suggesting that adequate moisture protection is essential for maritime pine CLT applications.

Schlagwörter

Stichwörter der Autor:innen

bond-line durabilitycross-laminated timber (CLT)cure kineticsmaritime pinepolyurethane (PUR)shear strength

Autor:innen und Institutionen

  • Department of Forest Engineering, Faculty of Technology, University of Brasília, Brasília 70919-970, Brazil.
  • Department of Wood Engineering, Polytechnic Institute of Viseu, 3504-510 Viseu, Portugal.
  • Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal.
  • Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal.

ORCID-Profile: Annie Cavalcante, Jorge M Martins, Margarida Lopes de Almeida, Cláudio Henrique Soares Del Menezzi, Luísa Hora de Carvalho

Förderung

  • Fundação para a Ciência e Tecnologia
  • Coordenação de Aperfeicoamento de Pessoal de Nível Superior
  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
  • FCT/MECI

Zitieren

APA

Cavalcante, A., Martins, J. M., Almeida, M. L., Del Menezzi, C. H. S., & Carvalho, L. H. (2026). Influence of Polyurethane Adhesive Formulation on Shear Performance of Maritime Pine Cross-Laminated Timber Under Dry and Moist Exposure Conditions. Materials, 19(10), 2030. https://doi.org/10.3390/ma19102030

Vancouver

Cavalcante A, Martins JM, Almeida ML, Del Menezzi CHS, Carvalho LH. Influence of Polyurethane Adhesive Formulation on Shear Performance of Maritime Pine Cross-Laminated Timber Under Dry and Moist Exposure Conditions. Materials. 2026;19(10):2030. doi:10.3390/ma19102030

BibTeX
@article{Cavalcante2026,
  author = {Cavalcante, Annie and Martins, Jorge M and Almeida, Margarida Lopes de and Del Menezzi, Cláudio Henrique Soares and Carvalho, Luísa Hora de},
  title = {Influence of Polyurethane Adhesive Formulation on Shear Performance of Maritime Pine Cross-Laminated Timber Under Dry and Moist Exposure Conditions},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2030},
  doi = {10.3390/ma19102030}
}
Kostenlos starten →