The Investigation of the Sensitivity of the Compliance to the Shape of the Spot in Welded Thermoplastic Single-Lap Shear (SLS) Joints
Materials · 12.05.2026 · 19 (10) · 2016
DOI: 10.3390/ma19102016 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.05.2026. Verfasst von Eva T B Smeets und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Structures and Materials, Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The …. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
To ensure safety in structural design, a method to quantify the damage in thermoplastic ultrasonic single-spot-welded Single-Lap Shear (SLS) joints is needed. This paper investigates whether detailed knowledge regarding the shape of the weld is required when using the global compliance to quantify damage. A finite element model using cohesive zone elements is developed in Abaqus to simulate single-spot SLS specimens with varying weld areas, aspect ratios, and damage growth directions, covering damage levels from 0 to 90% of the initial weld area. For each configuration, the relationship between intact weld area and global compliance is evaluated, and the numerical trends are compared to previously published experimental data from similar joints. The results show that weld size and damage growth direction have negligible influence on the relationship between global compliance and weld area, and that weld shape is also insignificant as long as the aspect ratio remains within a practical range; only very elongated welds with an aspect ratio over 4.4, which are unlikely in production, deviate significantly. Global compliance can be used as a reliable indicator of damage in single-spot ultrasonic welds that is insensitive to weld shape. This enables simplified in situ damage monitoring and reduces the need for detailed geometric characterisation during mechanical testing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Aerospace Structures and Materials, Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The Netherlands.
ORCID-Profile: Eva T B Smeets, Calvin D Rans, René Alderliesten, Irene Fernandez Villegas
Zitieren
APA
Smeets, E. T. B., Rans, C. D., Alderliesten, R., & Fernandez Villegas, I. (2026). The Investigation of the Sensitivity of the Compliance to the Shape of the Spot in Welded Thermoplastic Single-Lap Shear (SLS) Joints. Materials, 19(10), 2016. https://doi.org/10.3390/ma19102016
Vancouver
Smeets ETB, Rans CD, Alderliesten R, Fernandez Villegas I. The Investigation of the Sensitivity of the Compliance to the Shape of the Spot in Welded Thermoplastic Single-Lap Shear (SLS) Joints. Materials. 2026;19(10):2016. doi:10.3390/ma19102016
BibTeX
@article{Smeets2026,
author = {Smeets, Eva T B and Rans, Calvin D and Alderliesten, René and Fernandez Villegas, Irene},
title = {The Investigation of the Sensitivity of the Compliance to the Shape of the Spot in Welded Thermoplastic Single-Lap Shear (SLS) Joints},
journal = {Materials},
year = {2026},
volume = {19},
number = {10},
pages = {2016},
doi = {10.3390/ma19102016}
}
EUVIMED