EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

TiO2/K2Ti6O13 Binary Whiskers Modified Mullite Fiber-Based Materials with Enhanced Thermal Insulation Property

Xixi Cao, Xueying Zhang, Jiangtao Li, Jiachen Liu

Materials · 12.05.2026 · 19 (10) · 2007

DOI: 10.3390/ma19102007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.05.2026. Verfasst von Xixi Cao und 3 weiteren Autor:innen. Beteiligte Einrichtung: Key Lab of Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials Science and Engineering, Tianjin University, Tian…. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Tianjin, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mullite fiber materials are widely used in high-temperature thermal insulation applications, especially in aerospace thermal protection systems, due to their excellent thermal stability and low thermal conductivity. However, the material exhibits poor resistance to infrared radiative heat transfer at elevated temperatures. Accordingly, a dual-opacifier system composed of TiO2 and K2Ti6O13 binary whiskers was proposed as an effective strategy for enhancing thermal insulation performance. MF/TiO2w and MF/TiO2w/K2Ti6O13w were fabricated in this study using a sol–gel method combined with in situ whisker growth. The results show that upright and interlaced K2Ti6O13 and TiO2 whiskers were uniformly grown on the fiber surface, contributing to a high infrared reflectance of 97.7% in the wavelength range of 2.5–10 μm. Under a front-side temperature of 1000 °C, the modified mullite fiber-based material exhibits a backside temperature of 177.8 °C, corresponding to a reduction of 71.8 °C compared with the original sample (249.6 °C), demonstrating significantly enhanced thermal insulation performance. In addition, the composite exhibits an ultralow density of less than 0.20 g/cm3. The as-prepared thermal insulation material shows a high rebound rate of 76.5% at a strain of 30%, indicating good elasticity. The results demonstrate that the developed composite exhibits excellent infrared shielding and structural stability, confirming that the binary whisker strategy effectively enhances the thermal insulation performance of the mullite fiber-based materials, highlighting its potential for high-temperature aerospace applications.

Schlagwörter

Stichwörter der Autor:innen

K2Ti6O13TiO2infrared shieldingmullite fiberwhisker

Autor:innen und Institutionen

  • Key Lab of Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China.

Förderung

  • Natural Science Foundation of Tianjin
  • National Key Research and Development Program of China

Zitieren

APA

Cao, X., Zhang, X., Li, J., & Liu, J. (2026). TiO2/K2Ti6O13 Binary Whiskers Modified Mullite Fiber-Based Materials with Enhanced Thermal Insulation Property. Materials, 19(10), 2007. https://doi.org/10.3390/ma19102007

Vancouver

Cao X, Zhang X, Li J, Liu J. TiO2/K2Ti6O13 Binary Whiskers Modified Mullite Fiber-Based Materials with Enhanced Thermal Insulation Property. Materials. 2026;19(10):2007. doi:10.3390/ma19102007

BibTeX
@article{Cao2026,
  author = {Cao, Xixi and Zhang, Xueying and Li, Jiangtao and Liu, Jiachen},
  title = {TiO2/K2Ti6O13 Binary Whiskers Modified Mullite Fiber-Based Materials with Enhanced Thermal Insulation Property},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2007},
  doi = {10.3390/ma19102007}
}
Kostenlos starten →