Effects of Simulated Service Environments on the Microstructure and Interfacial Properties of Ceramic Fiber-Reinforced Al-Matrix Composites
Materials · 12.05.2026 · 19 (10) · 1999
DOI: 10.3390/ma19101999 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.05.2026. Verfasst von Desheng Chu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Electric Power Research Institute of Yunnan Power Grid Co., Ltd., Kunming 650500, China. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yunnan Provincial Department of Science and Technology, Yunnan Fundamental Research Projects.
Abstract (Originalsprache)
SiC fiber-reinforced aluminum matrix (SiCf/Al) composites have the potential to replace titanium alloys for fan/compressor blades due to their low density and favorable high-temperature performance. In this study, thermal exposure and thermal cycling tests were conducted to simulate service environments and to clarify their effects on the microstructure and interfacial properties of a SiCf/AlFe5Si2 composite. Thermal exposure was performed at 260–450 °C for 20–100 h, and thermal cycling was carried out between 300 or 350 °C (1 h dwell) and room temperature for 20–100 cycles. Interfacial shear strength was evaluated by push-out tests, while microstructural evolution was examined using SEM, TEM/EDS, and XRD. Three-dimensional finite element simulations were used to assess mismatch-driven residual-stress distributions during the cooling stage after thermal excursion. The results showed that interfacial shear strength decreased with increasing exposure temperature/time and degraded more severely under thermal cycling than under isothermal exposure at the same temperature. A rapid loss of interfacial strength occurred above ~400 °C, associated with significant interfacial-layer thickening and the formation of brittle AlxSiOy phases. The interfacial reaction layer followed parabolic growth kinetics, yielding a preliminary apparent activation energy of Q ≈ 150 kJ/mol estimated from two isothermal temperatures. The simulations indicated large opposing stresses between the matrix and the carbon-rich layer, supporting a mechanical driving force for interfacial debonding; however, heating/dwell time-dependent effects were not explicitly modeled and are discussed as limitations. These findings provide quantitative guidance for defining service-temperature limits and improving interfacial thermal stability in SiCf/AlFe5Si2 composites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Electric Power Research Institute of Yunnan Power Grid Co., Ltd., Kunming 650500, China.
- School of Electrical Engineering, Chongqing University, Chongqing 400044, China.
ORCID-Profile: Desheng Chu
Förderung
- Yunnan Provincial Department of Science and Technology
- Yunnan Fundamental Research Projects
Zitieren
APA
Chu, D., Wang, Y., Zhou, F., Liu, R., Zhu, L., & Peng, Q. (2026). Effects of Simulated Service Environments on the Microstructure and Interfacial Properties of Ceramic Fiber-Reinforced Al-Matrix Composites. Materials, 19(10), 1999. https://doi.org/10.3390/ma19101999
Vancouver
Chu D, Wang Y, Zhou F, Liu R, Zhu L, Peng Q. Effects of Simulated Service Environments on the Microstructure and Interfacial Properties of Ceramic Fiber-Reinforced Al-Matrix Composites. Materials. 2026;19(10):1999. doi:10.3390/ma19101999
BibTeX
@article{Chu2026,
author = {Chu, Desheng and Wang, Yanhan and Zhou, Fangrong and Liu, Ronghai and Zhu, Longchang and Peng, Qingjun},
title = {Effects of Simulated Service Environments on the Microstructure and Interfacial Properties of Ceramic Fiber-Reinforced Al-Matrix Composites},
journal = {Materials},
year = {2026},
volume = {19},
number = {10},
pages = {1999},
doi = {10.3390/ma19101999}
}
EUVIMED