EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Tin Bath Bottom Bricks for Float Glass Furnaces

Kuiqing Guo, Benjun Cheng, Weibin Xu, Xiaocheng Liang iD, Liming Zou, Wencheng Wang, Guoqi Liu

Materials · 11.05.2026 · 19 (10) · 1989

DOI: 10.3390/ma19101989 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.05.2026. Verfasst von Kuiqing Guo und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy Science and Engineering, Central South University, Changsha 410083, China. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The bottom brick is a critical component of float glass furnace tin baths, serving under harsh conditions including high temperature, tin penetration, hydrogen diffusion and alkali attack. Traditional flint clay-based bottom bricks suffer from high porosity and insufficient service performance. In this study, a high-performance low-cement castable was developed by introducing mullite aggregates to partially replace flint clay. The effects of mullite particle size and addition content on sintering behavior, mechanical properties, thermal shock resistance, refractoriness under load and hydrogen diffusion were systematically investigated. The results demonstrate that, compared with the existing tin bath bottom bricks applied in float glass furnaces, the introduction of 18 wt% mullite with a particle size of 5–3 mm can significantly increase the bulk density, reduce the apparent porosity, enhance the mechanical strength at both room temperature and high temperature, and achieve a higher refractoriness under load and lower hydrogen diffusion capacity. Accordingly, a novel tin bath bottom brick with excellent comprehensive properties for float glass furnaces was successfully developed.

Schlagwörter

Stichwörter der Autor:innen

float glass furnacelow-cement castablemechanical propertiesmullitethermal shock resistance

Autor:innen und Institutionen

  • School of Energy Science and Engineering, Central South University, Changsha 410083, China.
  • School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China.
  • State Key Laboratory of Advanced Refractories, Shanghai University, Shanghai 200444, China.

ORCID-Profile: Xiaocheng Liang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Guo, K., Cheng, B., Xu, W., Liang, X., Zou, L., Wang, W., & Liu, G. (2026). Research on Tin Bath Bottom Bricks for Float Glass Furnaces. Materials, 19(10), 1989. https://doi.org/10.3390/ma19101989

Vancouver

Guo K, Cheng B, Xu W, Liang X, Zou L, Wang W, et al. Research on Tin Bath Bottom Bricks for Float Glass Furnaces. Materials. 2026;19(10):1989. doi:10.3390/ma19101989

BibTeX
@article{Guo2026,
  author = {Guo, Kuiqing and Cheng, Benjun and Xu, Weibin and Liang, Xiaocheng and Zou, Liming and Wang, Wencheng and Liu, Guoqi},
  title = {Research on Tin Bath Bottom Bricks for Float Glass Furnaces},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {1989},
  doi = {10.3390/ma19101989}
}
Kostenlos starten →