EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Solution-Processed High-k HfO2 Gate Insulator for High-Performance Indium-Zinc-Oxide Thin-Film Transistors: Optimisation of Annealing Temperature and Insulator Thickness

Jialeen Sairike, Kamale Tuokedaerhan iD, Serikbek Sailanbek iD, Zhengang Cai, Haotian Yang

Materials · 09.05.2026 · 19 (10) · 1954

DOI: 10.3390/ma19101954 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.05.2026. Verfasst von Jialeen Sairike und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Xinjiang University, Urumqi 830046, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the continuous advancement of display technology and advanced integrated circuits, oxide thin-film transistors (TFTs) have become core devices due to their high mobility, low leakage current and excellent large-area uniformity. To achieve low power consumption, high performance and high reliability, the introduction of high-k gate insulating layers is crucial. Among the numerous high-k materials, hafnium oxide (HfO2) has attracted significant attention due to its excellent dielectric properties and good compatibility with CMOS processes. In this paper, uniform and dense HfO2 films were successfully fabricated using the sol–gel method to serve as insulating layers for TFT devices. Through experimental analysis, 400 °C was determined to be the optimal annealing temperature. At this temperature, the effects of replacing SiO2 with HfO2 as the insulating layer, as well as the impact of reducing film thickness, on TFT devices were investigated. Ultimately, at an annealing temperature of 400 °C, an 85 nm-thick HfO2 film achieved the highest on/off current ratio (Ion/off = 1.11 × 106), the lowest subthreshold swing (SS = 0.53 V/dec), the lowest threshold voltage (Vth = −1.1 V) and the lowest off-current ratio (Ioff = 2.5 × 10−12 A). It was confirmed that replacing SiO2 with HfO2 as the insulating layer is a viable approach for reducing the volume of TFT devices.

Schlagwörter

Stichwörter der Autor:innen

HIGH-Kinsulation layerthin film transistor

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Xinjiang University, Urumqi 830046, China.
  • Educational Laboratory of Semiconductor Device Engineering, Faculty of Physics and Technology, Al-Farabi Kazakh National University, Almaty 050040, Kazakhstan.

ORCID-Profile: Kamale Tuokedaerhan, Serikbek Sailanbek

Zitieren

APA

Sairike, J., Tuokedaerhan, K., Sailanbek, S., Cai, Z., & Yang, H. (2026). Solution-Processed High-k HfO2 Gate Insulator for High-Performance Indium-Zinc-Oxide Thin-Film Transistors: Optimisation of Annealing Temperature and Insulator Thickness. Materials, 19(10), 1954. https://doi.org/10.3390/ma19101954

Vancouver

Sairike J, Tuokedaerhan K, Sailanbek S, Cai Z, Yang H. Solution-Processed High-k HfO2 Gate Insulator for High-Performance Indium-Zinc-Oxide Thin-Film Transistors: Optimisation of Annealing Temperature and Insulator Thickness. Materials. 2026;19(10):1954. doi:10.3390/ma19101954

BibTeX
@article{Sairike2026,
  author = {Sairike, Jialeen and Tuokedaerhan, Kamale and Sailanbek, Serikbek and Cai, Zhengang and Yang, Haotian},
  title = {Solution-Processed High-k HfO2 Gate Insulator for High-Performance Indium-Zinc-Oxide Thin-Film Transistors: Optimisation of Annealing Temperature and Insulator Thickness},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {1954},
  doi = {10.3390/ma19101954}
}
Kostenlos starten →