Recycled Polypropylene Composites Reinforced with Microcellulose Fibres and Microcellulose-Derived Biochar: Thermal, Rheological and Mechanical Performance
Materials · 09.05.2026 · 19 (10) · 1942
DOI: 10.3390/ma19101942 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 09.05.2026. Verfasst von Wiktor Wyderkiewicz und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Polymer and Dye Technology, Lodz University of Technology, Stefanowskiego 16, 90-537 Lodz, Poland. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lodz University of Technology.
Abstract (Originalsprache)
The mechanical recycling of mono-material biaxially oriented polypropylene (BOPP) packaging films produces recycled polypropylene (rPP) with degraded properties, limiting its use in higher-performance applications. This study investigates rPP reinforcement with 6–12 µm microcellulose fibres (MCFs, 2–10 pbw) and microcellulose-derived biochar (BC, 5–20 pbw), characterized by DSC, TGA/DTG, MVR/MFR, temperature-dependent rheology, mechanical testing and water contact angle (WCA) measurements. Both fillers acted as heterogeneous nucleating agents, shifting crystallization by up to 4 °C and increasing crystallinity by 2–4%. MCF introduced an additional low-temperature degradation step, whereas BC increased onset and peak degradation temperatures by up to 20 °C and increased char yield. Low MCF loadings increased MVR/MFR by 20–25% and reduced melt viscosity, while BC decreased flow indices by up to 50% and stiffened the melt. Tensile and flexural moduli increased by 15–25% with MCF and 40–50% with BC, with a stiffness–toughness trade-off at the highest BC contents. MCF reduced the water contact angle to 63.0° at 10 pbw, while BC increased it to 108.1° at 20 pbw, indicating opposite effects on surface wettability. Converting a single cellulosic feedstock into fibrous or carbonised fillers enables bio-based upgrading of rPP, in line with circular economy principles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Polymer and Dye Technology, Lodz University of Technology, Stefanowskiego 16, 90-537 Lodz, Poland.
ORCID-Profile: Wiktor Wyderkiewicz, Anna Sowińska-Baranowska, Marcin Masłowski
Förderung
- Lodz University of Technology
Zitieren
APA
Wyderkiewicz, W., Miedzianowska-Masłowska, J., Sowińska-Baranowska, A., & Masłowski, M. (2026). Recycled Polypropylene Composites Reinforced with Microcellulose Fibres and Microcellulose-Derived Biochar: Thermal, Rheological and Mechanical Performance. Materials, 19(10), 1942. https://doi.org/10.3390/ma19101942
Vancouver
Wyderkiewicz W, Miedzianowska-Masłowska J, Sowińska-Baranowska A, Masłowski M. Recycled Polypropylene Composites Reinforced with Microcellulose Fibres and Microcellulose-Derived Biochar: Thermal, Rheological and Mechanical Performance. Materials. 2026;19(10):1942. doi:10.3390/ma19101942
BibTeX
@article{Wyderkiewicz2026,
author = {Wyderkiewicz, Wiktor and Miedzianowska-Masłowska, Justyna and Sowińska-Baranowska, Anna and Masłowski, Marcin},
title = {Recycled Polypropylene Composites Reinforced with Microcellulose Fibres and Microcellulose-Derived Biochar: Thermal, Rheological and Mechanical Performance},
journal = {Materials},
year = {2026},
volume = {19},
number = {10},
pages = {1942},
doi = {10.3390/ma19101942}
}
EUVIMED