Effect of Chromium Content on the Passive Film and Corrosion Behavior of Steel Reinforcement in a Simulated Concrete Pore Solution
Materials · 08.05.2026 · 19 (10) · 1939
DOI: 10.3390/ma19101939 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.05.2026. Verfasst von Haipeng Lu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Ocean Equipment and Manufacturing Engineering Technology Research Center, School of Mechanical Engineering, Guangdong Ocean Univ…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Basic and Applied Basic Research Foundation, Innovation Team of Guangdong Ocean University, Innovation Team Project for Ordinary Universities in Guangdong Province.
Abstract (Originalsprache)
Chloride-induced corrosion of steel reinforcements is one of the main factors restricting the durability of reinforced concrete structures. Chromium (Cr) alloying is an effective strategy to enhance the corrosion resistance of steel. However, the appropriate Cr content for different environments remains undetermined. In this study, steels with three different Cr contents of 0, 5, and 10 wt.% were prepared. Electrochemical methods and physical characterization techniques were used to investigate the effects of Cr content on the passive film and corrosion behavior of steels in a simulated concrete pore solution under chloride attack. The results show that Cr alloying increases the critical chloride concentration for steel depassivation, passive film resistance, and charge transfer resistance. Specifically, the critical chloride concentrations of 0Cr, 5Cr, and 10Cr are 0.63, 0.81, and 1.56 mol/L, respectively. In a simulated pore solution with 0.6 mol/L chloride, the charge transfer resistances of 0Cr, 5Cr, and 10Cr are 4.1, 5.8, and 63.4 × 105 Ω·cm2, respectively, corresponding to corrosion rates that are 1.39- and 15.31-times lower for 5Cr and 10Cr relative to 0Cr. Therefore, in concrete exposed to marine chloride attacks, the use of high Cr alloying is necessary. Although the cost increases and the weldability deteriorates, the improvement in corrosion resistance is far superior to that of medium Cr alloying. The excellent corrosion resistance of high-Cr steel stems from its passive film mainly composed of stable Cr2O3 with a lower oxygen vacancy defect density, while that of 5Cr is dominated by less stable Cr(OH)3, which weakens the corrosion resistance of the passive film.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Provincial Ocean Equipment and Manufacturing Engineering Technology Research Center, School of Mechanical Engineering, Guangdong Ocean University, Zhanjiang 524088, China.
Förderung
- Guangdong Basic and Applied Basic Research Foundation
- Innovation Team of Guangdong Ocean University
- Innovation Team Project for Ordinary Universities in Guangdong Province
Zitieren
APA
Lu, H., Tian, Y., & Wu, D. (2026). Effect of Chromium Content on the Passive Film and Corrosion Behavior of Steel Reinforcement in a Simulated Concrete Pore Solution. Materials, 19(10), 1939. https://doi.org/10.3390/ma19101939
Vancouver
Lu H, Tian Y, Wu D. Effect of Chromium Content on the Passive Film and Corrosion Behavior of Steel Reinforcement in a Simulated Concrete Pore Solution. Materials. 2026;19(10):1939. doi:10.3390/ma19101939
BibTeX
@article{Lu2026,
author = {Lu, Haipeng and Tian, Yuwan and Wu, Danmei},
title = {Effect of Chromium Content on the Passive Film and Corrosion Behavior of Steel Reinforcement in a Simulated Concrete Pore Solution},
journal = {Materials},
year = {2026},
volume = {19},
number = {10},
pages = {1939},
doi = {10.3390/ma19101939}
}
EUVIMED