EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flexural Behavior of Slender UHPC Prestressed Beams Without Passive Reinforcement

Juan Navarro-Gregori iD, Yeiner A Gómez-Velásquez, Juan A Mateu-Sánchez, Pedro Serna iD, José R Martí-Vargas

Materials · 08.05.2026 · 19 (10) · 1936

DOI: 10.3390/ma19101936 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.05.2026. Verfasst von Juan Navarro-Gregori und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Concrete Science and Technology (ICITECH), Universitat Politècnica de València, Camino de Vera s/n, Building 4N, 46022 Valencia, Spain. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, Agencia Estatal de Investigación.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the flexural behavior of slender ultra-high-performance fiber-reinforced concrete (UHPC) beams with cross-sections intended for scalable precast production. The members are prestressed only, with no passive reinforcement. An experimental program on eighteen beams combined three cross-sectional typologies (rectangular as a reference, I-shaped, and H-shaped), three UHPC mixes with fiber contents of 130, 160, and hybrid 130 + 60 kg/m3, and two prestressing layouts (bottom-only and symmetric top-and-bottom). Prestress was indirectly controlled by evaluating effective tendon stress, with time-dependent prestress losses quantified using vibrating-wire strain gauges. Four-point bending tests provided material characterization and structural response, enabling assessment of stiffness and ultimate capacity. The results highlight the coupled influence of cross-section, fiber dosage, and prestress configuration on global response. Post-cracking residual strength in UHPC promoted stable multiple cracking, while prestressing governed deflection control. Residual equivalent flexural tensile stresses above 35 MPa at deflections over 50 mm, span/70, were achieved in I- and H-shaped sections, exceeding those of rectangular sections. Overall, the study substantiates the feasibility of lightweight, durable, prestressed UHPC members that deliver significant self-weight reductions without compromising reliability.

Schlagwörter

Stichwörter der Autor:innen

UHPCeffective prestressflexural behaviorprestress lossesprestressed beamsslender precast elements

Autor:innen und Institutionen

  • Institute of Concrete Science and Technology (ICITECH), Universitat Politècnica de València, Camino de Vera s/n, Building 4N, 46022 Valencia, Spain.

ORCID-Profile: Juan Navarro-Gregori, Pedro Serna

Förderung

  • Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital
  • Agencia Estatal de Investigación

Zitieren

APA

Navarro-Gregori, J., Gómez-Velásquez, Y. A., Mateu-Sánchez, J. A., Serna, P., & Martí-Vargas, J. R. (2026). Flexural Behavior of Slender UHPC Prestressed Beams Without Passive Reinforcement. Materials, 19(10), 1936. https://doi.org/10.3390/ma19101936

Vancouver

Navarro-Gregori J, Gómez-Velásquez YA, Mateu-Sánchez JA, Serna P, Martí-Vargas JR. Flexural Behavior of Slender UHPC Prestressed Beams Without Passive Reinforcement. Materials. 2026;19(10):1936. doi:10.3390/ma19101936

BibTeX
@article{NavarroGregori2026,
  author = {Navarro-Gregori, Juan and Gómez-Velásquez, Yeiner A and Mateu-Sánchez, Juan A and Serna, Pedro and Martí-Vargas, José R},
  title = {Flexural Behavior of Slender UHPC Prestressed Beams Without Passive Reinforcement},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {1936},
  doi = {10.3390/ma19101936}
}
Kostenlos starten →