EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Alkaline Chemical Polishing Combined with Silane Electrodeposition for Improving Etched Tunnel Distribution in Aluminum Foil

Jinlong Wu, Huwei Tao, Wenfeng Yang, Bowei Zhang, Junsheng Wu iD

Materials · 07.05.2026 · 19 (10) · 1922

DOI: 10.3390/ma19101922 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.05.2026. Verfasst von Jinlong Wu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Shihezi Municipal Science and Technology Project, the Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A combined pretreatment strategy involving alkaline chemical polishing and silane electrodeposition was proposed for regulating the surface state of aluminum foil and the formation of etched tunnels during DC tunnel etching. Electrochemical measurements and morphological characterization were used to evaluate the effects of this pretreatment on surface electrochemical activity and etched tunnel structure. The results showed that appropriate alkaline chemical polishing facilitated the removal of rolling-induced surface relief, improved the uniformity of surface electrochemical activity, and favored the uniform deposition of the silane film. In contrast, excessive polishing generated surface pits during the polishing process, and these preformed pits subsequently promoted tunnel merging during DC tunnel etching. Under the optimal processing conditions, the combined pretreatment significantly improved the distribution uniformity and dimensional consistency of etched tunnels and suppressed tunnel merging. Under the present testing conditions, the specific capacitance increased from 0.386 to 0.509 μF cm−2, corresponding to an improvement of approximately 31.9%. This work provides an effective approach for optimizing etched tunnel structure and improving the capacitance-related performance of aluminum capacitor foil.

Schlagwörter

Stichwörter der Autor:innen

alkaline chemical polishaluminum foiletched tunnelssilane electrodeposition

Autor:innen und Institutionen

  • Institute of Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China.
  • Xinjiang Joinworld Company Limited, Urumuqi 830000, China.

ORCID-Profile: Junsheng Wu

Förderung

  • National Key Research and Development Program of China
  • Shihezi Municipal Science and Technology Project
  • the Fundamental Research Funds for the Central Universities
  • Xinjiang Talent Development Fund
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Wu, J., Tao, H., Yang, W., Zhang, B., & Wu, J. (2026). Alkaline Chemical Polishing Combined with Silane Electrodeposition for Improving Etched Tunnel Distribution in Aluminum Foil. Materials, 19(10), 1922. https://doi.org/10.3390/ma19101922

Vancouver

Wu J, Tao H, Yang W, Zhang B, Wu J. Alkaline Chemical Polishing Combined with Silane Electrodeposition for Improving Etched Tunnel Distribution in Aluminum Foil. Materials. 2026;19(10):1922. doi:10.3390/ma19101922

BibTeX
@article{Wu2026,
  author = {Wu, Jinlong and Tao, Huwei and Yang, Wenfeng and Zhang, Bowei and Wu, Junsheng},
  title = {Alkaline Chemical Polishing Combined with Silane Electrodeposition for Improving Etched Tunnel Distribution in Aluminum Foil},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {1922},
  doi = {10.3390/ma19101922}
}
Kostenlos starten →