EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving 3C-SiC Quality Through Wafer-Bonded Switchback Epitaxy

Gerard Colston iD, Kushani H Perera, Arne Renz, Peter Gammon iD, Marina Antoniou, Philip A Mawby, Vishal A Shah iD

Materials · 05.05.2026 · 19 (9) · 1896

DOI: 10.3390/ma19091896 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.05.2026. Verfasst von Gerard Colston und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, The University of Warwick, Coventry CV4 7AL, UK. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovate UK, InnovateUK.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The crystallinity of cubic silicon carbide (3C-SiC) epilayers is improved through the use of a novel wafer bonding and regrowth technique resulting in a reduction in planar defects. The process involves the epitaxial growth of a 3–6 µm thick 3C-SiC seed on silicon (Si), which is polished and bonded to a new handle wafer before the original substrate and defective interface region of the 3C-SiC epilayer are removed. Further epitaxial growth on this Bonded Switchback template results in higher quality 3C-SiC epilayers through the reduction in crystal mosaicity, stacking fault defects, and elimination of interface voids. The process could be applied to 3C-SiC grown on both on- and off-axis substrates, and the form of the new handle has no impact on the growth process, enabling this technology to be applied to sapphire or hexagonal 4H-SiC substrates. The use of such substrates would overcome the thermal budget limitations of Si substrates for 3C-SiC heteroepitaxy and ion implantation. Bonded Switchback can improve material quality for applications in power electronics, as well as see the heterogeneous integration of 3C-SiC into other device structures, potentially leading to a new range of hybrid 3C-SiC/Si devices without the high density of defects observed at the interface between these two materials.

Schlagwörter

Stichwörter der Autor:innen

3C-SiCCMPepitaxypower electronicswafer bonding

Autor:innen und Institutionen

  • School of Engineering, The University of Warwick, Coventry CV4 7AL, UK.

ORCID-Profile: Gerard Colston, Peter Gammon, Vishal A Shah

Förderung

  • Innovate UK
  • InnovateUK

Zitieren

APA

Colston, G., Perera, K. H., Renz, A., Gammon, P., Antoniou, M., Mawby, P. A., & Shah, V. A. (2026). Improving 3C-SiC Quality Through Wafer-Bonded Switchback Epitaxy. Materials, 19(9), 1896. https://doi.org/10.3390/ma19091896

Vancouver

Colston G, Perera KH, Renz A, Gammon P, Antoniou M, Mawby PA, et al. Improving 3C-SiC Quality Through Wafer-Bonded Switchback Epitaxy. Materials. 2026;19(9):1896. doi:10.3390/ma19091896

BibTeX
@article{Colston2026,
  author = {Colston, Gerard and Perera, Kushani H and Renz, Arne and Gammon, Peter and Antoniou, Marina and Mawby, Philip A and Shah, Vishal A},
  title = {Improving 3C-SiC Quality Through Wafer-Bonded Switchback Epitaxy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1896},
  doi = {10.3390/ma19091896}
}
Kostenlos starten →