EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydrogen Embrittlement Behavior of Laser Melting Deposited Ti-6Al-4V Alloy with Different Build Orientations

Kejun Jiang iD, Junjun Jin, Yuxiang Cai, Zhihui Li, Sunmin Zou, Zhongyin Zhu, Guoqing Gou, Xiaohong Sun, Zhiyi Zhang

Materials · 01.05.2026 · 19 (9) · 1869

DOI: 10.3390/ma19091869 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.05.2026. Verfasst von Kejun Jiang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Advanced Technologies of Materials, Ministry of Education, School of Materials Science and Engineering, Southwest Jiaotong Universi…. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research on rapid scanning and health Assessment Technology of spherical Tank stress based on electromagnetic Ultrasound, State Market Supervision Administration, Key Research and Development Plan of Sichuan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the hydrogen embrittlement susceptibility of laser melting deposition (LMD)-produced Ti-6Al-4V alloy with different build orientations (0°, 45°, 90°) through electrochemical hydrogen charging, slow strain rate testing, and microstructural characterization. Ti-6Al-4V alloys are widely used in marine and offshore engineering, where cathodic protection and corrosion reactions can generate hydrogen, leading to hydrogen ingress and potential embrittlement. Results show that prolonged hydrogen charging induces hydride formation, α-phase fragmentation, and β-phase dissolution, significantly degrading corrosion resistance and mechanical properties. Hydrogen embrittlement susceptibility exhibits notable anisotropy: elongation reductions for 0°, 45°, and 90° specimens are 40.1%, 40.8%, and 29.4%, respectively. The relatively superior resistance observed in the 90° orientation may be associated with its single-layer structure and more uniform dimple distribution. In contrast, the multilayer interfaces in other orientations are likely to serve as preferential sites for hydrogen accumulation, which may contribute to the increased embrittlement susceptibility. This research reveals the failure mechanism of LMD Ti-6Al-4V in hydrogen environments and supports its application in marine engineering.

Schlagwörter

Stichwörter der Autor:innen

Ti-6Al-4V titanium alloybuild orientationhydrogen embrittlementlaser melting deposition (LMD)

Autor:innen und Institutionen

  • Key Laboratory of Advanced Technologies of Materials, Ministry of Education, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China.
  • School of Engineering Training Center, Southwest Jiaotong University, Chengdu 610031, China.
  • School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 180240, China.
  • CRRC Qingdao Sifang Co., Ltd., Qingdao 266111, China.

ORCID-Profile: Kejun Jiang

Förderung

  • Research on rapid scanning and health Assessment Technology of spherical Tank stress based on electromagnetic Ultrasound
  • State Market Supervision Administration
  • Key Research and Development Plan of Sichuan Province

Zitieren

APA

Jiang, K., Jin, J., Cai, Y., Li, Z., Zou, S., Zhu, Z., Gou, G., Sun, X., & Zhang, Z. (2026). Hydrogen Embrittlement Behavior of Laser Melting Deposited Ti-6Al-4V Alloy with Different Build Orientations. Materials, 19(9), 1869. https://doi.org/10.3390/ma19091869

Vancouver

Jiang K, Jin J, Cai Y, Li Z, Zou S, Zhu Z, et al. Hydrogen Embrittlement Behavior of Laser Melting Deposited Ti-6Al-4V Alloy with Different Build Orientations. Materials. 2026;19(9):1869. doi:10.3390/ma19091869

BibTeX
@article{Jiang2026,
  author = {Jiang, Kejun and Jin, Junjun and Cai, Yuxiang and Li, Zhihui and Zou, Sunmin and Zhu, Zhongyin and Gou, Guoqing and Sun, Xiaohong and Zhang, Zhiyi},
  title = {Hydrogen Embrittlement Behavior of Laser Melting Deposited Ti-6Al-4V Alloy with Different Build Orientations},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1869},
  doi = {10.3390/ma19091869}
}
Kostenlos starten →