Physics-Guided Machine Learning for Performance Prediction and Multi-Objective Optimization of High-Conductivity Aluminum Conductors
Materials · 29.04.2026 · 19 (9) · 1839
DOI: 10.3390/ma19091839 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 29.04.2026. Verfasst von Yaojun Miao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Shanghai Key Lab of Advanced High-Temperature Materials and Precision Forming and State Key Lab of Metal Matrix Composites, School of Materials Scien…. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology of the People's Republic of China, National Natural Science Foundation of China, Inner Mongolia Research Institute, Shanghai Jiao Tong University.
Abstract (Originalsprache)
Producing high-conductivity aluminum conductors for power transmission involves 23 trace elements and multiple interconnected thermo-mechanical stages. The ultra-low alloying levels required to preserve high electrical conductivity create a narrow compositional window and highly imbalanced distributions, which hinder traditional data-driven learning. Here, we developed a physics-guided machine-learning framework based on 4458 valid industrial production records to predict tensile strength and electrical resistivity. In addition to raw composition and process parameters, we introduce ratio descriptors (e.g., Fe/Si and Al/Si) and propose a physics-informed metric termed the Equivalent Solute–Heat Index (ESHI) to couple key solute chemistry (Si, Fe, B) with normalized thermal-history intensity. Fe and Si primarily influence resistivity through impurity/solute scattering, while B mainly affects microstructural uniformity via grain refinement. Incorporating ESHI as an augmented signal into the best-performing XGB surrogate markedly improves generalizability, increasing the tensile strength R2 from 0.75 to ~0.92. SHAP analysis reveals that ESHI dominates the decision logic by modulating both targets with metallurgically interpretable mechanisms: solute-controlled scattering and thermal history-traced second-phase evolution that stabilizes the microstructure. NSGA-III was further employed to map the Pareto front and identify composition–process combinations that optimize the strength–conductivity trade-off, enabling improved mechanical reliability while minimizing resistive losses in practical power-transmission applications. Experimental validation on industrial wires confirms this reliability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Shanghai Key Lab of Advanced High-Temperature Materials and Precision Forming and State Key Lab of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, Ch…
ORCID-Profile: Zhikang Cao, Baode Sun
Förderung
- Ministry of Science and Technology of the People's Republic of China
- National Natural Science Foundation of China
- Inner Mongolia Research Institute, Shanghai Jiao Tong University
- Smart Grid National Science and Technology Major Project
- Shanghai Jiao Tong University
Zitieren
APA
Miao, Y., Cao, Z., Yao, T., Wang, Y., Gao, H., Wang, J., & Sun, B. (2026). Physics-Guided Machine Learning for Performance Prediction and Multi-Objective Optimization of High-Conductivity Aluminum Conductors. Materials, 19(9), 1839. https://doi.org/10.3390/ma19091839
Vancouver
Miao Y, Cao Z, Yao T, Wang Y, Gao H, Wang J, et al. Physics-Guided Machine Learning for Performance Prediction and Multi-Objective Optimization of High-Conductivity Aluminum Conductors. Materials. 2026;19(9):1839. doi:10.3390/ma19091839
BibTeX
@article{Miao2026,
author = {Miao, Yaojun and Cao, Zhikang and Yao, Tong and Wang, Yufei and Gao, Haiyan and Wang, Jun and Sun, Baode},
title = {Physics-Guided Machine Learning for Performance Prediction and Multi-Objective Optimization of High-Conductivity Aluminum Conductors},
journal = {Materials},
year = {2026},
volume = {19},
number = {9},
pages = {1839},
doi = {10.3390/ma19091839}
}
EUVIMED