Thin Copper Foils: From Electrodeposition Conditions to Adhesion Performances
Materials · 29.04.2026 · 19 (9) · 1838
DOI: 10.3390/ma19091838 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 29.04.2026. Verfasst von Ivana O Mladenović und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation of the Republic of Serbia, Ministry of Science, Technological Development and Innovation of the Republic of Serbia.
Abstract (Originalsprache)
Cathodic electrodeposition of copper on molybdenum and stainless-steel substrates has been investigated with the aim of examining their potential to produce thin copper foils (TCFs). Copper in the form of a thin film was electrodeposited galvanostatically from the acidic sulfate electrolyte without and with an addition of suppressor/activator additives, such as chloride ions, polyethylene glycol 6000 and 3–mercapto–1–propanesulfonic acid. The cathodes and electrodeposited Cu films were characterized by SEM, AFM, and XRD techniques, while the adhesion of Cu films, as a crucial parameter in the production of Cu foils, was estimated by a lab-made prototype of a bending test machine made by applying additive technology. The adhesion parameter named “critical cycle number” (nc), which defines the minimal number of cycles leading to a delamination (separation) of the film from the cathode was used for assessing the adhesion features of the films. The easiest delamination, i.e., the smallest nc, showed nanocrystalline films obtained with the addition of all additives, whereupon the values were significantly smaller than the values obtained for microcrystalline films obtained without and with a partial combination of the additives. The easy delamination of the nanocrystalline films indicated that both substrates have a high potential for application in the production of TCFs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia.
- Innovation Center of Faculty of Technology and Metallurgy Ltd., 11000 Belgrade, Serbia.
- Faculty of Physics, University of Belgrade, Studentski Trg 12-16, 11000 Belgrade, Serbia.
- Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia.
ORCID-Profile: Ivana O Mladenović, Željko Radovanović, Dana G Vasiljević-Radović, Rastko Vasilić, Miloš Vorkapić, Predrag Živković, Nebojša D Nikolić
Förderung
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia
- Ministry of Science
- Technological Development and Innovation of the Republic of Serbia
Zitieren
APA
Mladenović, I. O., Radovanović, Ž., Vasiljević-Radović, D. G., Vasilić, R., Vorkapić, M., Živković, P., & Nikolić, N. D. (2026). Thin Copper Foils: From Electrodeposition Conditions to Adhesion Performances. Materials, 19(9), 1838. https://doi.org/10.3390/ma19091838
Vancouver
Mladenović IO, Radovanović Ž, Vasiljević-Radović DG, Vasilić R, Vorkapić M, Živković P, et al. Thin Copper Foils: From Electrodeposition Conditions to Adhesion Performances. Materials. 2026;19(9):1838. doi:10.3390/ma19091838
BibTeX
@article{Mladenovi2026,
author = {Mladenović, Ivana O and Radovanović, Željko and Vasiljević-Radović, Dana G and Vasilić, Rastko and Vorkapić, Miloš and Živković, Predrag and Nikolić, Nebojša D},
title = {Thin Copper Foils: From Electrodeposition Conditions to Adhesion Performances},
journal = {Materials},
year = {2026},
volume = {19},
number = {9},
pages = {1838},
doi = {10.3390/ma19091838}
}
EUVIMED