EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Ferrite–Cementite Microstructure on Tensile and Cutting Behaviour of C75S Steel

Jarosław Kaczmarczyk iD

Materials · 29.04.2026 · 19 (9) · 1836

DOI: 10.3390/ma19091836 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.04.2026. Verfasst von Jarosław Kaczmarczyk. Beteiligte Einrichtung: Department of Theoretical and Applied Mechanics, Faculty of Mechanical Engineering, Silesian University of Technology, 18A Konarskiego Street, 44-100…. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Silesian University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, scanning electron microscopy (SEM) analysis is used to reveal the real microstructure of C75S steel and to compare grain morphology and deformation features with numerical predictions. A micro-scale finite element model of C75S steel is developed to investigate its tensile response in order to understand how steel actually deforms and fails at the microstructure level. Subsequently, the validated microstructural model is employed to simulate the cutting process using the finite element method, focusing on stress concentration and damage initiation at the grain and interface zones. The results demonstrate that microstructural modelling provides improved insight into deformation and fracture mechanisms compared to homogenised approaches, highlighting the critical role of cementite distribution and interfacial behaviour during tensile loading and micro-scale cutting. The cementite particle sizes in C75S steel range from approximately 0.5 to 2.0 µm, with circularity values between 0.7 and 0.95 and a volume fraction of about 10–12%. The proposed framework offers a robust basis for predicting the cutting performance of high-carbon steels.

Schlagwörter

Stichwörter der Autor:innen

SEM analysiscutting processferrite–cementite interfacemicro-scale finite element methodtensile test

Autor:innen und Institutionen

  • Department of Theoretical and Applied Mechanics, Faculty of Mechanical Engineering, Silesian University of Technology, 18A Konarskiego Street, 44-100 Gliwice, Poland.

ORCID-Profile: Jarosław Kaczmarczyk

Förderung

  • Silesian University of Technology

Zitieren

APA

Kaczmarczyk, J. (2026). Impact of Ferrite–Cementite Microstructure on Tensile and Cutting Behaviour of C75S Steel. Materials, 19(9), 1836. https://doi.org/10.3390/ma19091836

Vancouver

Kaczmarczyk J. Impact of Ferrite–Cementite Microstructure on Tensile and Cutting Behaviour of C75S Steel. Materials. 2026;19(9):1836. doi:10.3390/ma19091836

BibTeX
@article{Kaczmarczyk2026,
  author = {Kaczmarczyk, Jarosław},
  title = {Impact of Ferrite–Cementite Microstructure on Tensile and Cutting Behaviour of C75S Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1836},
  doi = {10.3390/ma19091836}
}
Kostenlos starten →