Development of Optical-Guiding Scintillators with Ultrafine (~12 μm) Uniform Scintillator Cores for High-Resolution X-Ray Imaging
Materials · 29.04.2026 · 19 (9) · 1834
DOI: 10.3390/ma19091834 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 29.04.2026. Verfasst von Kei Kamada und 9 weiteren Autor:innen. Beteiligte Einrichtung: New Industry Creation Hatchery Center, Tohoku University, 6-6-10 Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Miyagi, Japan. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JSPS KAKENHI, JST CREST, JAEA Nuclear Energy S & T and Human Resource Development Project.
Abstract (Originalsprache)
We report the development of bundled optical-guiding crystal scintillators (OCSs) with ultrafine and uniform scintillator cores (~12 μm) for high-resolution X-ray imaging. Conventional OCS fabrication using iodide scintillators often suffers from iodine volatilization, bubble formation, and core discontinuities, which limit structural uniformity and device reliability. To address these limitations, a hollow-fiber-based fabrication strategy was introduced. Hollow glass fibers were first bundled and drawn without scintillator materials, followed by capillary infiltration of a Tl-doped Cs3Cu2I5 (Tl: CCI) melt. This approach enabled the stable formation of densely packed bundled OCS structures with uniform core diameters of 10–12 μm while suppressing volatilization-induced defects. Radioluminescence measurements confirmed a broad emission peak at ~442 nm, consistent with Tl:CCI scintillation. X-ray imaging experiments demonstrated superior spatial resolution and image contrast compared with a commercial CsI:Tl columnar scintillator. The bundled OCS exhibited an average contrast transfer function (CTF) of 30.7% at ~10 lp/mm, exceeding the reference value. These results demonstrate that the hollow-fiber architecture provides an effective route toward scalable ultrafine-core scintillators and highlight the potential of Tl:CCI-filled OCSs for next-generation high-resolution X-ray imaging.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- New Industry Creation Hatchery Center, Tohoku University, 6-6-10 Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Miyagi, Japan.
- C&A Corporation, 1-16-23 Ichibancho, Aoba-ku, Sendai 980-0811, Miyagi, Japan.
- Institute for Material Research, Tohoku University, 2-1-1 Katahira Aoba-ku, Sendai 980-8577, Miyagi, Japan.
- Department of Materials Science, Graduate School of Engineering, Tohoku University, 6-6 Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Miyagi, Japan.
ORCID-Profile: Testuo Kudo, Yoshiyuki Usuki, Kyoung Jin Kim, Rikito Murakami, Satoshi Ishizawa
Förderung
- JSPS KAKENHI
- JST CREST
- JAEA Nuclear Energy S & T and Human Resource Development Project
Zitieren
APA
Kamada, K., Yoshino, M., Nakata, Y., Kudo, T., Usuki, Y., Kutsuzawa, N., Kim, K. J., Murakami, R., Ishizawa, S., & Yoshikawa, A. (2026). Development of Optical-Guiding Scintillators with Ultrafine (~12 μm) Uniform Scintillator Cores for High-Resolution X-Ray Imaging. Materials, 19(9), 1834. https://doi.org/10.3390/ma19091834
Vancouver
Kamada K, Yoshino M, Nakata Y, Kudo T, Usuki Y, Kutsuzawa N, et al. Development of Optical-Guiding Scintillators with Ultrafine (~12 μm) Uniform Scintillator Cores for High-Resolution X-Ray Imaging. Materials. 2026;19(9):1834. doi:10.3390/ma19091834
BibTeX
@article{Kamada2026,
author = {Kamada, Kei and Yoshino, Masao and Nakata, Yuhei and Kudo, Testuo and Usuki, Yoshiyuki and Kutsuzawa, Naoko and Kim, Kyoung Jin and Murakami, Rikito and Ishizawa, Satoshi and Yoshikawa, Akira},
title = {Development of Optical-Guiding Scintillators with Ultrafine (~12 μm) Uniform Scintillator Cores for High-Resolution X-Ray Imaging},
journal = {Materials},
year = {2026},
volume = {19},
number = {9},
pages = {1834},
doi = {10.3390/ma19091834}
}
EUVIMED