EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Performance Porous Ceramics from Red Mud via Foam-Gelcasting for Efficient Waste Utilization

Yanxiu Wang, Fan Wang iD, Ling Zhang, Shipei Wang, Anqi Yang, Chengwen Wang, Li Wang iD, Haisheng Han, Wei Sun

Materials · 29.04.2026 · 19 (9) · 1817

DOI: 10.3390/ma19091817 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.04.2026. Verfasst von Yanxiu Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Innovation Program of Hunan Province, Postdoctoral Fellowship Program of CPSF.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Red mud, as a by-product of alkaline regeneration of alumina, has limited application due to its strong alkalinity, fine particle size, and complex composition. In this work, red mud porous ceramics with uniform pore size distribution and high mechanical strength were prepared using a foam-gel casting method. The effects of solid loading and sintering temperature on the microstructure of porous ceramics were systematically investigated. The porosity of red mud-based porousceramics sintered at 1150 °C with a solid content of 60.4% was 33.7%, and the maximum compressive strength was 54.70 MPa, while the porousceramics prepared with a solid loading of 34.1% and sintered at 1050 °C achieved a maximum porosity of 79.7% and a compressive strength of 2.36 MPa. Increasing the solid loading reduced porosity and enhanced compressive strength, allowing for the tailoring of mechanical properties to meet specific application requirements. Higher sintering temperature promoted the formation of the liquid phase, enhanced particle bonding, and further improved the compressive strength. Additionally, toxicity leaching tests confirmed that the ceramics are environmentally safe, with leachate levels well within regulated limits. These results demonstrate the potential of foam-gel casting as an effective route for transforming red mud into value-added porous ceramics, thereby contributing to sustainable waste utilization and broadening the application prospects of red mud-based materials.

Schlagwörter

Stichwörter der Autor:innen

foam-gelcastingphase evolutionporous ceramicred mudthermodynamic calculationwaste disposal

Autor:innen und Institutionen

  • School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China.
  • Key Laboratory of Hunan Province for Clean and Efficient Utilization of Strategic Calcium-Containing Mineral Resources, Changsha 410083, China.
  • College of Engineering, Mathematics and Physical Sciences, University of Exeter, Exeter EX4 4QF, UK.

ORCID-Profile: Fan Wang, Li Wang

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Innovation Program of Hunan Province
  • Postdoctoral Fellowship Program of CPSF
  • Postdoctoral Fellowship Program of China Postdoctoral Science Foundation-Hunan Joint Support Program
  • Postdoctoral Fellowship Program of China Postdoctoral Science Foundation–Hunan Joint Support Program

Zitieren

APA

Wang, Y., Wang, F., Zhang, L., Wang, S., Yang, A., Wang, C., Wang, L., Han, H., & Sun, W. (2026). High-Performance Porous Ceramics from Red Mud via Foam-Gelcasting for Efficient Waste Utilization. Materials, 19(9), 1817. https://doi.org/10.3390/ma19091817

Vancouver

Wang Y, Wang F, Zhang L, Wang S, Yang A, Wang C, et al. High-Performance Porous Ceramics from Red Mud via Foam-Gelcasting for Efficient Waste Utilization. Materials. 2026;19(9):1817. doi:10.3390/ma19091817

BibTeX
@article{Wang2026,
  author = {Wang, Yanxiu and Wang, Fan and Zhang, Ling and Wang, Shipei and Yang, Anqi and Wang, Chengwen and Wang, Li and Han, Haisheng and Sun, Wei},
  title = {High-Performance Porous Ceramics from Red Mud via Foam-Gelcasting for Efficient Waste Utilization},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1817},
  doi = {10.3390/ma19091817}
}
Kostenlos starten →