EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Characterization of Temperature-Triggered Microcapsules Fabricated via Low-Temperature Shear Method

Zhitian Xie, He Wang, Wei Song, Chentao Xu, Shicheng Liu, Xiaokai Niu, Meng Qi

Materials · 28.04.2026 · 19 (9) · 1799

DOI: 10.3390/ma19091799 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.04.2026. Verfasst von Zhitian Xie und 6 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Municipal Engineering Research Institute, Beijing 100037, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Emergency leakage repair in subway shield tunnels requires a technique to encapsulate highly reactive sodium silicate that is simple and field-deployable, yet no mature solution currently exists. The challenge lies in sodium silicate’s strong alkalinity and high osmotic pressure, both of which corrode most shell materials. This study proposes a “composite core” concept—functionally re-engineering the core rather than relying on complex shell chemistries. Using hydroxypropyl methylcellulose (HPMC) as the key material, temperature-triggered microcapsules with a nano-silica shell and sodium silicate–HPMC core were fabricated via low-temperature shear. Low temperature (10–15 °C) is critical: it suppresses side reactions and tunes viscosity to 2000–5000 cP, facilitating shear dispersion. The resulting microcapsules exhibit well-defined morphology with a dense shell. Temperature response tests reveal distinct release onset at ~30 °C (HPMC’s LCST): HPMC chain collapse generates internal stress that ruptures the shell, driving progressive sodium silicate release. Alkaline resistance tests confirm that intact microcapsules remain stable in high-pH environments (pH ≈ 13.2) for 30 min. This work validates the “composite core” concept and provides a simple, field-operable route to fabricate temperature-triggered microcapsules for emergency repair applications.

Schlagwörter

Stichwörter der Autor:innen

hydroxypropyl methylcelluloselow-temperature shearmicrocapsulessodium silicatetemperature-triggered

Autor:innen und Institutionen

  • Beijing Municipal Engineering Research Institute, Beijing 100037, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Xie, Z., Wang, H., Song, W., Xu, C., Liu, S., Niu, X., & Qi, M. (2026). Preparation and Characterization of Temperature-Triggered Microcapsules Fabricated via Low-Temperature Shear Method. Materials, 19(9), 1799. https://doi.org/10.3390/ma19091799

Vancouver

Xie Z, Wang H, Song W, Xu C, Liu S, Niu X, et al. Preparation and Characterization of Temperature-Triggered Microcapsules Fabricated via Low-Temperature Shear Method. Materials. 2026;19(9):1799. doi:10.3390/ma19091799

BibTeX
@article{Xie2026,
  author = {Xie, Zhitian and Wang, He and Song, Wei and Xu, Chentao and Liu, Shicheng and Niu, Xiaokai and Qi, Meng},
  title = {Preparation and Characterization of Temperature-Triggered Microcapsules Fabricated via Low-Temperature Shear Method},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1799},
  doi = {10.3390/ma19091799}
}
Kostenlos starten →