EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Post-Processing Optimization of MDLP-Fabricated 316L Stainless Steel: Microstructural Evolution and Mechanical Properties

Zequn Wu, Weiwei Liu, Hongzhi Zhou, Xing Zhang iD, Yao Chen iD, Qinghao Zhang, Wenjie Xu, Wenli Li iD, Zhanwen Xing iD

Materials · 27.04.2026 · 19 (9) · 1769

DOI: 10.3390/ma19091769 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.04.2026. Verfasst von Zequn Wu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, Soochow University, Suzhou 215021, China. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Suzhou Major Science and Technology Achievement Transformation Projec, National Natural Science Foundation of China, Suzhou Major Science and Technology Achievement Transformation Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal Digital light processing (MDLP) offers high resolution and excellent surface quality, but the final properties of printed parts are highly dependent on post-processing. In this study, the effects of debinding, decarburization, and sintering on the shape fidelity, microstructure, and mechanical properties of MDLP-fabricated 316L stainless steel were systematically investigated. The optimal post-processing route consisted of debinding in an inert atmosphere, decarburization in air within 400–600 °C, and sintering at 1370 °C for 4 h under flowing nitrogen. Under these conditions, the sintered parts achieved a relative density of 98.03 ± 0.23%, hardness of 380.63 ± 9.15 HV, elastic modulus of 213.47 ± 5.5 GPa, tensile strength of 519.7 ± 22 MPa, and elongation at fracture of 76.8 ± 9.3%. Microstructural analysis showed that increasing the sintering temperature reduced porosity and smoothed the morphology of Cr-rich oxygen-containing second phase regions, thereby alleviating stress concentration and improving mechanical properties. This study provides an effective post-processing strategy for MDLP-fabricated 316L stainless steel and examines the microstructural origins of the observed property evolution.

Schlagwörter

Stichwörter der Autor:innen

316L stainless steelMDLPdecarburizationpost-processingsintering

Autor:innen und Institutionen

  • School of Mechanical and Electrical Engineering, Soochow University, Suzhou 215021, China.
  • College of Mechanical Engineering, Hunan Institute of Science and Technology, Yueyang 414015, China.

ORCID-Profile: Xing Zhang, Yao Chen, Wenli Li, Zhanwen Xing

Förderung

  • Suzhou Major Science and Technology Achievement Transformation Projec
  • National Natural Science Foundation of China
  • Suzhou Major Science and Technology Achievement Transformation Project

Zitieren

APA

Wu, Z., Liu, W., Zhou, H., Zhang, X., Chen, Y., Zhang, Q., Xu, W., Li, W., & Xing, Z. (2026). Post-Processing Optimization of MDLP-Fabricated 316L Stainless Steel: Microstructural Evolution and Mechanical Properties. Materials, 19(9), 1769. https://doi.org/10.3390/ma19091769

Vancouver

Wu Z, Liu W, Zhou H, Zhang X, Chen Y, Zhang Q, et al. Post-Processing Optimization of MDLP-Fabricated 316L Stainless Steel: Microstructural Evolution and Mechanical Properties. Materials. 2026;19(9):1769. doi:10.3390/ma19091769

BibTeX
@article{Wu2026,
  author = {Wu, Zequn and Liu, Weiwei and Zhou, Hongzhi and Zhang, Xing and Chen, Yao and Zhang, Qinghao and Xu, Wenjie and Li, Wenli and Xing, Zhanwen},
  title = {Post-Processing Optimization of MDLP-Fabricated 316L Stainless Steel: Microstructural Evolution and Mechanical Properties},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1769},
  doi = {10.3390/ma19091769}
}
Kostenlos starten →