EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Purity, Uniform, and Spherical Hafnium Carbide Nanoparticles Derived from a Novel Amorphous Hafnium-Based Metal–Organic Framework Precursor for the Preparation of High-Performance Ceramics

Hongzhi Cheng iD, Jian Gu iD, Siyuan Kan iD, Ran Xie, Quan Li, Sinuo Zhang, Junyang Jin, Yang Wang, Jian Yang, Chang-An Wang iD

Materials · 24.04.2026 · 19 (9) · 1754

DOI: 10.3390/ma19091754 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.04.2026. Verfasst von Hongzhi Cheng und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory of New Ceramic Materials Tsinghua University, Tsinghua University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel amorphous Hf-MOFs precursor was successfully synthesized and converted into HfC nanoparticles via one-step pyrolysis. The effects of metal/ligand molar ratios, solvent types, and pyrolysis temperature were systematically studied. High-purity spherical HfC nanoparticles (44.30 ± 9.63 nm) were obtained at 1500 °C using a 1.5:1 metal/ligand molar ratio with mixed anhydrous ethanol/deionized water solvents. At a pyrolysis temperature of 1700 °C, the as-synthesized HfC nanoparticles possessed an exceptionally low oxygen content of 0.76%, alongside a carbon content of 6.42% that almost perfectly matches the theoretical value of stoichiometric HfC. The formation mechanism involving Hf-O-C coordination and carbothermal reduction was clarified. Additive-free HfC ceramics were fabricated using the as-synthesized HfC nanoparticles via spark plasma sintering (1950 °C, 30 MPa, 20 min). The resulting ceramics exhibited a relative density of 96.7% and a Vickers hardness of 20.2 GPa, both of which are significantly superior to those of ceramics sintered from commercial HfC powders under identical conditions (95.8% and 17.8 GPa, respectively). This work provides a promising and feasible pathway for the preparation of other high-quality ultra-high temperature hafnium-based carbide powders and ceramics.

Schlagwörter

Stichwörter der Autor:innen

HfC nanoparticleslow temperature pyrolysismetal-organic frameworksultra-high temperature ceramics

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China.
  • Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing 211816, China.
  • Advanced Bio and Healthcare Materials Research Division, Korea Institute of Materials Science, Changwon 51508, Republic of Korea.
  • State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China.

ORCID-Profile: Hongzhi Cheng, Jian Gu, Siyuan Kan, Chang-An Wang

Förderung

  • State Key Laboratory of New Ceramic Materials Tsinghua University
  • Tsinghua University

Zitieren

APA

Cheng, H., Gu, J., Kan, S., Xie, R., Li, Q., Zhang, S., Jin, J., Wang, Y., Yang, J., & Wang, C. A. (2026). High-Purity, Uniform, and Spherical Hafnium Carbide Nanoparticles Derived from a Novel Amorphous Hafnium-Based Metal–Organic Framework Precursor for the Preparation of High-Performance Ceramics. Materials, 19(9), 1754. https://doi.org/10.3390/ma19091754

Vancouver

Cheng H, Gu J, Kan S, Xie R, Li Q, Zhang S, et al. High-Purity, Uniform, and Spherical Hafnium Carbide Nanoparticles Derived from a Novel Amorphous Hafnium-Based Metal–Organic Framework Precursor for the Preparation of High-Performance Ceramics. Materials. 2026;19(9):1754. doi:10.3390/ma19091754

BibTeX
@article{Cheng2026,
  author = {Cheng, Hongzhi and Gu, Jian and Kan, Siyuan and Xie, Ran and Li, Quan and Zhang, Sinuo and Jin, Junyang and Wang, Yang and Yang, Jian and Wang, Chang-An},
  title = {High-Purity, Uniform, and Spherical Hafnium Carbide Nanoparticles Derived from a Novel Amorphous Hafnium-Based Metal–Organic Framework Precursor for the Preparation of High-Performance Ceramics},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1754},
  doi = {10.3390/ma19091754}
}
Kostenlos starten →