EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Composition Driven Redistribution of Feeding Mechanisms in Hypoeutectic Al–Si–Mg Alloys

Aleksandra Patarić iD, Mile Djurdjevic iD, Srecko Manasijevic iD, Srecko Stopic, Marija Mihailović iD

Materials · 24.04.2026 · 19 (9) · 1744

DOI: 10.3390/ma19091744 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.04.2026. Verfasst von Aleksandra Patarić und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Chemistry, Technology and Metallurgy, National Institute of the Republic of Serbia, University of Belgrade, Njegoševa 12, 11000 Belgrade…. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science and Technological Development, Ministry of Science, Technological Development, and Innovation of the Republic of Serbia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study provides a systematic quantitative assessment of the influence of silicon (5–9 wt.%) and magnesium (0–0.6 wt.%) on the solidification behavior and feeding mechanisms of hypoeutectic Al–Si–Mg casting alloys. Cooling curve analysis combined with first-derivative and ΔT (Tw − Tc) evaluation was used to determine characteristic solidification temperatures, including the liquidus, dendrite coherency, rigidity, and solidus temperatures, enabling the precise delineation of feeding regions. Increasing silicon content reduced all characteristic temperatures, while magnesium addition exerted a more pronounced effect on rigidity and solidus temperatures, significantly redistributing the relative contributions of mass, interdendritic, and burst feeding. In particular, magnesium addition systematically expanded the interdendritic feeding interval and reduced the burst-feeding range, promoting earlier dendrite interlocking and restricting melt flow during late-stage solidification. Quantitative temperature ratio analysis revealed that magnesium plays a dominant role in shifting feeding toward interdendritic-controlled flow, especially in low-Si alloys. Sand Hourglass testing confirmed that this redistribution directly correlated with increased shrinkage porosity, with the highest porosity observed in the AlSi9Mg0.6 alloy. The results establish a quantitative link between alloy composition, feeding redistribution, and porosity susceptibility, providing a practical framework for optimizing the design and casting performance of Al–Si–Mg alloys.

Schlagwörter

Stichwörter der Autor:innen

Al-Si–Mg alloyscooling curvesfeeding efficiencythermal analysis

Autor:innen und Institutionen

  • Institute of Chemistry, Technology and Metallurgy, National Institute of the Republic of Serbia, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia.
  • Department of Material Science and Technology, University of Applied Sciences Upper Austria, Roseggerstraße 15, 4600 Wels, Austria.
  • Lola Institute, Kneza Višeslava 70a, 11030 Belgrade, Serbia.
  • IME Process Metallurgy and Metal Recycling, RWTH Aachen University, Intzestrasse 3, 52056 Aachen, Germany.

ORCID-Profile: Aleksandra Patarić, Mile Djurdjevic, Srecko Manasijevic, Marija Mihailović

Förderung

  • Ministry of Education, Science and Technological Development
  • Ministry of Science, Technological Development, and Innovation of the Republic of Serbia

Zitieren

APA

Patarić, A., Djurdjevic, M., Manasijevic, S., Stopic, S., & Mihailović, M. (2026). Composition Driven Redistribution of Feeding Mechanisms in Hypoeutectic Al–Si–Mg Alloys. Materials, 19(9), 1744. https://doi.org/10.3390/ma19091744

Vancouver

Patarić A, Djurdjevic M, Manasijevic S, Stopic S, Mihailović M. Composition Driven Redistribution of Feeding Mechanisms in Hypoeutectic Al–Si–Mg Alloys. Materials. 2026;19(9):1744. doi:10.3390/ma19091744

BibTeX
@article{Patari2026,
  author = {Patarić, Aleksandra and Djurdjevic, Mile and Manasijevic, Srecko and Stopic, Srecko and Mihailović, Marija},
  title = {Composition Driven Redistribution of Feeding Mechanisms in Hypoeutectic Al–Si–Mg Alloys},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1744},
  doi = {10.3390/ma19091744}
}
Kostenlos starten →