Effects of Scan Speed on Crack Elimination, Microstructural Evolution, and Mechanical Properties of IN738LC Alloy Processed by Laser Powder Bed Fusion
Materials · 24.04.2026 · 19 (9) · 1727
DOI: 10.3390/ma19091727 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 24.04.2026. Verfasst von Pengju Wang und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Program of Guangdong Province, Guangdong Basic and Applied Basic Research Foundation, National Key Research and Development Program of China.
Abstract (Originalsprache)
Cracking represents a critical issue in γ’-strengthened Ni-based superalloys processed via laser powder bed fusion. This study systematically investigated the influence of scan speed (800–1200 mm/s) on the crack elimination mechanism, microstructural evolution, and mechanical properties of LPBF-processed IN738LC alloy. Near-defect-free IN738LC parts were successfully produced with a relative density of 99.6% and a crack density of only 0.025%. The results indicate that as the scan speed increased from 800 mm/s to 1100 mm/s, a flatter melt pool (S4) was obtained, which reduced the proportion of high-angle grain boundaries. The cooling rate also increased from 13.68 K/μs to 15.96 K/μs, promoting grain refinement and the dispersion precipitation of MC carbides. The refined grains effectively suppressed stress concentration and inhibited crack propagation along grain boundaries. The optimized process (1100 mm/s) achieved optimal comprehensive mechanical properties. Compared to a scan speed of 800 mm/s, the ultimate tensile strength, yield strength, and elongation at room-temperature increased from 1075 MPa, 820 MPa, and 13.2% to 1179 MPa, 871 MPa, and 21.1%, respectively, while hardness increased from 365 HV1.0 to 387 HV1.0. This study demonstrated that the microstructure and mechanical properties of LPBF-processed IN738LC alloy can be tailored via controlling the thermal history of the melt pool, providing a foundation for processing high-crack-sensitivity alloys utilizing laser powder bed fusion.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China.
- Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong 999077, China.
- State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China.
- College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China.
ORCID-Profile: Changjun Han, Xusheng Yang, Leilei Wang, Di Wang
Förderung
- Science and Technology Program of Guangdong Province
- Guangdong Basic and Applied Basic Research Foundation
- National Key Research and Development Program of China
- Natural Science Basic Research Program of Shaanxi
- Shenzhen Science and Technology Planning Project
Zitieren
APA
Wang, P., Du, J., Liu, L., Wei, Y., Yang, W., Li, Y., Han, C., Yang, X., Tan, H., Wang, L., Yang, Y., & Wang, D. (2026). Effects of Scan Speed on Crack Elimination, Microstructural Evolution, and Mechanical Properties of IN738LC Alloy Processed by Laser Powder Bed Fusion. Materials, 19(9), 1727. https://doi.org/10.3390/ma19091727
Vancouver
Wang P, Du J, Liu L, Wei Y, Yang W, Li Y, et al. Effects of Scan Speed on Crack Elimination, Microstructural Evolution, and Mechanical Properties of IN738LC Alloy Processed by Laser Powder Bed Fusion. Materials. 2026;19(9):1727. doi:10.3390/ma19091727
BibTeX
@article{Wang2026,
author = {Wang, Pengju and Du, Jingguang and Liu, Linqing and Wei, Yang and Yang, Wenqing and Li, Yang and Han, Changjun and Yang, Xusheng and Tan, Hua and Wang, Leilei and Yang, Yongqiang and Wang, Di},
title = {Effects of Scan Speed on Crack Elimination, Microstructural Evolution, and Mechanical Properties of IN738LC Alloy Processed by Laser Powder Bed Fusion},
journal = {Materials},
year = {2026},
volume = {19},
number = {9},
pages = {1727},
doi = {10.3390/ma19091727}
}
EUVIMED