EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Optimisation of an Industrial Waste-Based Additive for Improving Concrete Performance

Rauan Lukpanov iD, Duman Dyussembinov iD, Aliya Altynbekova iD, Serik Yenkebayev iD, Lyailya Kabdyrova iD, Denis Tsygulyov iD

Materials · 23.04.2026 · 19 (9) · 1698

DOI: 10.3390/ma19091698 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.04.2026. Verfasst von Rauan Lukpanov und 5 weiteren Autor:innen. Beteiligte Einrichtung: Solid Research Group, LLP, Astana 010008, Kazakhstan. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan, Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the development and optimization of a multi-component modifying additive based on industrial waste for improving the mechanical and durability properties of concrete. The additive consists of microsilica (Ms), phosphogypsum (PhG), soapstock (Sp), and post-alcohol bard (PaB), and its performance was evaluated using a staged experimental approach. The results showed that the optimal content of microsilica is 20% of the cement mass; the optimal content of phosphogypsum is 15% of the combined mass of the cement and microsilica; the optimal content of soapstock is 10% of the total mass of the cement, microsilica, and phosphogypsum; and the optimal post-alcohol bard is 5% of the water mass. At these concentrations, the compressive strength increased by up to 28.3% compared to the reference sample. Soapstock significantly reduced water absorption (up to 36.8%) and improved freeze–thaw resistance due to the hydrophobization of the cement matrix. However, excessive soapstock content led to a reduction in strength. The addition of post-alcohol bard provided a plasticizing effect and reduced water absorption, with the optimal concentration for strength being 2.5%, while the highest freeze–thaw resistance was observed at 5%. The combined effect of the components resulted in the formation of a denser microstructure and improved durability of concrete. These findings demonstrate the effectiveness of industrial waste-based additives in enhancing concrete performance and durability, contributing to sustainable material development.

Schlagwörter

Stichwörter der Autor:innen

compressive strengthconcretefrost resistancemicrosilicamodified additivephosphogypsumpost-alcohol bardsoapstockwater absorption

Autor:innen und Institutionen

  • Solid Research Group, LLP, Astana 010008, Kazakhstan.
  • Department of Technology of Industrial and Civil Engineering, L.N. Gumilyov Eurasian National University, Astana 010008, Kazakhstan.
  • Department of Construction, L.N. Gumilyov Eurasian National University, Astana 010008, Kazakhstan.

ORCID-Profile: Rauan Lukpanov, Duman Dyussembinov, Aliya Altynbekova, Serik Yenkebayev, Lyailya Kabdyrova, Denis Tsygulyov

Förderung

  • Ministry of Science and Higher Education of the Republic of Kazakhstan
  • Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan

Zitieren

APA

Lukpanov, R., Dyussembinov, D., Altynbekova, A., Yenkebayev, S., Kabdyrova, L., & Tsygulyov, D. (2026). Development and Optimisation of an Industrial Waste-Based Additive for Improving Concrete Performance. Materials, 19(9), 1698. https://doi.org/10.3390/ma19091698

Vancouver

Lukpanov R, Dyussembinov D, Altynbekova A, Yenkebayev S, Kabdyrova L, Tsygulyov D. Development and Optimisation of an Industrial Waste-Based Additive for Improving Concrete Performance. Materials. 2026;19(9):1698. doi:10.3390/ma19091698

BibTeX
@article{Lukpanov2026,
  author = {Lukpanov, Rauan and Dyussembinov, Duman and Altynbekova, Aliya and Yenkebayev, Serik and Kabdyrova, Lyailya and Tsygulyov, Denis},
  title = {Development and Optimisation of an Industrial Waste-Based Additive for Improving Concrete Performance},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1698},
  doi = {10.3390/ma19091698}
}
Kostenlos starten →