Effect of Laser Energy Density on Surface Morphology, Composition and Cleaning Mechanism of TC1 Titanium Alloy During Nanosecond Laser Cleaning
Materials · 22.04.2026 · 19 (9) · 1695
DOI: 10.3390/ma19091695 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 22.04.2026. Verfasst von Yang Chen und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Micro-Systems and Micro-Structures Manufacturing of Ministry of Education, Harbin Institute of Technology, Harbin 150080, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Fundamental Research Project, Fundamental Research Project.
Abstract (Originalsprache)
To remove the oxide layer of TC1 titanium alloys in an environmentally friendly and efficient manner, this study conducted experiments using a nanosecond pulsed laser to systematically investigate the influence of different laser energy densities on the cleaning effect. The results showed that the oxide layer could be completely removed at an energy density of 6.37 J/cm2, with the surface oxygen element content reduced to 4.87%. The macroscopic surface presented a silvery metallic luster. Moreover, the roughness decreased significantly with the increase in energy density. At 6.37 J/cm2, the surface roughness dropped to 0.37 µm. The mechanism of removing the oxide layer of TC1 titanium alloy mainly includes laser ablation and plasma impact. At energy densities ranging from 2.55 J/cm2 to 6.37 J/cm2, the cleaning mechanism was mainly laser ablation. When the energy density exceeded 6.37 J/cm2, the cleaning mechanism gradually shifted from laser ablation to plasma impact as the dominant factor. Meanwhile, the microhardness of the samples after laser cleaning was basically consistent with that of the samples subjected to mechanical grinding, which provides a basis for a nanosecond pulsed laser to replace traditional methods for oxide layer cleaning.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Micro-Systems and Micro-Structures Manufacturing of Ministry of Education, Harbin Institute of Technology, Harbin 150080, China.
- School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150080, China.
- AECC Harbin Dong'an Engine Co., Ltd., Harbin 150060, China.
- Zhengzhou Advanced Research Institute of Harbin Institute of Technology, Zhengzhou 450000, China.
Förderung
- the Fundamental Research Project
- Fundamental Research Project
Zitieren
APA
Chen, Y., Sun, H., Li, X., Song, H., Han, Z., Nie, J., Zhang, D., Xu, J., & Guo, B. (2026). Effect of Laser Energy Density on Surface Morphology, Composition and Cleaning Mechanism of TC1 Titanium Alloy During Nanosecond Laser Cleaning. Materials, 19(9), 1695. https://doi.org/10.3390/ma19091695
Vancouver
Chen Y, Sun H, Li X, Song H, Han Z, Nie J, et al. Effect of Laser Energy Density on Surface Morphology, Composition and Cleaning Mechanism of TC1 Titanium Alloy During Nanosecond Laser Cleaning. Materials. 2026;19(9):1695. doi:10.3390/ma19091695
BibTeX
@article{Chen2026,
author = {Chen, Yang and Sun, Haixiang and Li, Xuecheng and Song, Hongyan and Han, Zexuan and Nie, Jinhao and Zhang, Donghe and Xu, Jie and Guo, Bin},
title = {Effect of Laser Energy Density on Surface Morphology, Composition and Cleaning Mechanism of TC1 Titanium Alloy During Nanosecond Laser Cleaning},
journal = {Materials},
year = {2026},
volume = {19},
number = {9},
pages = {1695},
doi = {10.3390/ma19091695}
}
EUVIMED