EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Performance and Microstructural Characterization of PET-Modified Cement Mortars with Metakaolin

Aleksandra Kostrzanowska-Siedlarz iD, Tomasz Ponikiewski iD, Agnieszka Kocot, Oldrich Sucharda iD

Materials · 22.04.2026 · 19 (9) · 1682

DOI: 10.3390/ma19091682 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.04.2026. Verfasst von Aleksandra Kostrzanowska-Siedlarz und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Building Processes and Building Physics, Faculty of Civil Engineering, Silesian University of Technology, 44-100 Gliwice, Poland. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of the Environment, Ministry of the Environment of the Czech Republic.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The incorporation of plastic waste into cement-based materials offers a promising strategy for improving sustainability; however, it is often associated with reduced mechanical performance due to weak interfacial bonding. This study investigates the effect of metakaolin on the interfacial transition zone (ITZ) and mechanical properties of cement mortars modified with polyethylene terephthalate (PET) flakes used for the partial replacement of natural sand. Mortars containing 10 and 50 wt% metakaolin (as cement replacement) and 5 vol.% PET flakes (as sand replacement) were prepared and tested after 28 days of curing. Compressive and flexural strength were evaluated, and microstructural analysis was conducted using scanning electron microscopy (SEM) with a focus on the ITZ. The results indicate that the incorporation of PET flakes leads to a reduction in mechanical properties due to the formation of a porous and weak ITZ. However, the addition of 10 wt% metakaolin significantly improved mechanical properties, enabling PET-modified mortars to achieve strength comparable to the reference mix. SEM observations revealed that metakaolin contributed to the refinement of the microstructure and reduction in ITZ porosity, which enhanced interfacial bonding and improved stress transfer between PET particles and the cement matrix. These findings demonstrate that metakaolin can effectively mitigate the negative effects associated with PET incorporation by improving the microstructural characteristics of the ITZ, thereby enhancing the performance of sustainable cement-based composites.

Schlagwörter

Stichwörter der Autor:innen

PET flakesSEM analysiscement mortarsinterfacial transition zonemechanical propertiesmetakaolinmicrostructurerecycled aggregates

Autor:innen und Institutionen

  • Department of Building Processes and Building Physics, Faculty of Civil Engineering, Silesian University of Technology, 44-100 Gliwice, Poland.
  • Department of Building Materials and Diagnostics of Structures, Faculty of Civil Engineering, VSB-Technical University of Ostrava, 708 33 Ostrava-Poruba, Czech Republic.

ORCID-Profile: Aleksandra Kostrzanowska-Siedlarz, Tomasz Ponikiewski, Oldrich Sucharda

Förderung

  • Ministry of the Environment
  • Ministry of the Environment of the Czech Republic

Zitieren

APA

Kostrzanowska-Siedlarz, A., Ponikiewski, T., Kocot, A., & Sucharda, O. (2026). Mechanical Performance and Microstructural Characterization of PET-Modified Cement Mortars with Metakaolin. Materials, 19(9), 1682. https://doi.org/10.3390/ma19091682

Vancouver

Kostrzanowska-Siedlarz A, Ponikiewski T, Kocot A, Sucharda O. Mechanical Performance and Microstructural Characterization of PET-Modified Cement Mortars with Metakaolin. Materials. 2026;19(9):1682. doi:10.3390/ma19091682

BibTeX
@article{KostrzanowskaSiedlarz2026,
  author = {Kostrzanowska-Siedlarz, Aleksandra and Ponikiewski, Tomasz and Kocot, Agnieszka and Sucharda, Oldrich},
  title = {Mechanical Performance and Microstructural Characterization of PET-Modified Cement Mortars with Metakaolin},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1682},
  doi = {10.3390/ma19091682}
}
Kostenlos starten →