EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Scale Numerical Simulation of Fatigue Crack Propagation Mechanisms in the Heat-Affected Zone of AH36 Steel Welds

Chaoming Shen iD, Yuxiao Fu, Wei Zhao, Jianhua Yang

Materials · 22.04.2026 · 19 (9) · 1680

DOI: 10.3390/ma19091680 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.04.2026. Verfasst von Chaoming Shen und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Naval Architecture & Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Jiaxing Public Welfare Research Program Project, The Science and Technology Plan Project of Zhejiang Provincial Market Supervision and Admin-istration Bureau in 2025, Jiaxing Public Welfare Research Program Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study conducts multi-scale numerical simulations spanning atomic to macroscopic scales (i.e., from nanometer to millimeter scale) to investigate the fatigue crack propagation behavior in the welded heat-affected zone (HAZ) of AH36 shipbuilding steel. A coupled molecular dynamics–finite element method (MD-FEM) was employed to establish a multi-scale model. Through the transfer of boundary displacements, equivalent mapping of crack morphology, and crack-tip tracking, an iterative multi-scale simulation of 600 tension–tension fatigue cycles was achieved. The results indicate that the crack propagation rate is significantly influenced by crack tip morphology (blunting/sharpening) and growth direction. Notably, the peak strain at the boundary is not the sole determining factor. Periodic blunting of the crack tip occurs during cyclic loading, accompanied by a decrease in the propagation rate. Additionally, the stress field near the crack tip induces microscopic defects such as voids in the nearby area, affecting the crack propagation. This study, based on multi-scale analysis, reveals the microscopic mechanism and evolution law of fatigue crack propagation in the heat-affected zone of AH36 steel welds.

Schlagwörter

Stichwörter der Autor:innen

AH36 steelcoupled molecular dynamics–finite element method (MD-FEM)fatigue crack propagationmulti-scale simulationweld heat-affected zone

Autor:innen und Institutionen

  • School of Naval Architecture & Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China.
  • Jiaxing Special Equipment Inspection and Testing Institute, Jiaxing 314000, China.

ORCID-Profile: Chaoming Shen

Förderung

  • The Jiaxing Public Welfare Research Program Project
  • The Science and Technology Plan Project of Zhejiang Provincial Market Supervision and Admin-istration Bureau in 2025
  • Jiaxing Public Welfare Research Program Project
  • Zhejiang Provincial Market Supervision and Administration Bureau

Zitieren

APA

Shen, C., Fu, Y., Zhao, W., & Yang, J. (2026). Multi-Scale Numerical Simulation of Fatigue Crack Propagation Mechanisms in the Heat-Affected Zone of AH36 Steel Welds. Materials, 19(9), 1680. https://doi.org/10.3390/ma19091680

Vancouver

Shen C, Fu Y, Zhao W, Yang J. Multi-Scale Numerical Simulation of Fatigue Crack Propagation Mechanisms in the Heat-Affected Zone of AH36 Steel Welds. Materials. 2026;19(9):1680. doi:10.3390/ma19091680

BibTeX
@article{Shen2026,
  author = {Shen, Chaoming and Fu, Yuxiao and Zhao, Wei and Yang, Jianhua},
  title = {Multi-Scale Numerical Simulation of Fatigue Crack Propagation Mechanisms in the Heat-Affected Zone of AH36 Steel Welds},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1680},
  doi = {10.3390/ma19091680}
}
Kostenlos starten →