Processing of High-Quality WC-Inconel 625 Coating via DED
Materials · 21.04.2026 · 19 (8) · 1666
DOI: 10.3390/ma19081666 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.04.2026. Verfasst von Jingjing Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: School of Mechanical & Aerospace Engineering, NTU, Makino Asia Pte Ltd., AM Centre of Excellence, Singapore.
Abstract (Originalsprache)
This study examines the effects of laser power (P), scanning speed (SS), and energy density (ED) on the microstructure and hardness of WC-reinforced Inconel 625 metallic matrix composite (MMC) coatings fabricated via a powder-based directed energy deposition (DED) process developed by Makino Asia Pte Ltd. Coating layers were evaluated for surface roughness (Sa), layer height (LH), porosity (Pr), dilution height (DH), dilution ratio (DR), and WC retention (WC%). Trends in the data reveal how process parameters influence deposition quality and microstructural evolution: higher P or lower SS increased melt pool depth, promoted WC dissolution, and coarsened microstructure, whereas lower P or higher SS preserved WC particles and minimized substrate dilution. Hardness variations in the Inconel 625 matrix were associated with dendrite size, solid-solution strengthening, dislocation density, and secondary carbide formation. These findings provide quantitative guidance for selecting DED parameters to produce crack-free WC-Inconel 625 MMC coatings with controlled microstructure and tailored mechanical properties.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore.
- Makino Asia Pte Ltd., 2 Gul Ave, Singapore 629649, Singapore.
Förderung
- School of Mechanical & Aerospace Engineering
- NTU
- Makino Asia Pte Ltd., AM Centre of Excellence, Singapore
- RIE2025 Manufacturing, Trade and Connectivity (MTC) Industry Alignment fund Pre-Positioning
Zitieren
APA
Wang, J., Subramaniam, N. A., Tan, E. Z. E., & Pang, J. H. L. (2026). Processing of High-Quality WC-Inconel 625 Coating via DED. Materials, 19(8), 1666. https://doi.org/10.3390/ma19081666
Vancouver
Wang J, Subramaniam NA, Tan EZE, Pang JHL. Processing of High-Quality WC-Inconel 625 Coating via DED. Materials. 2026;19(8):1666. doi:10.3390/ma19081666
BibTeX
@article{Wang2026,
author = {Wang, Jingjing and Subramaniam, Nellian Alagu and Tan, Eddie Zhi En and Pang, John Hock Lye},
title = {Processing of High-Quality WC-Inconel 625 Coating via DED},
journal = {Materials},
year = {2026},
volume = {19},
number = {8},
pages = {1666},
doi = {10.3390/ma19081666}
}
EUVIMED