EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mineral Admixture Governs the Synergy of Polymer and Fibers in Ultra-Low Temperature Concrete

Yao Li, Yonggang Deng iD

Materials · 12.04.2026 · 19 (8) · 1541

DOI: 10.3390/ma19081541 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.04.2026. Verfasst von Yao Li und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Architecture and Civil Engineering, Liuzhou Institute of Technology, Liuzhou 545616, China. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of all-concrete liquefied natural gas (LNG) storage tanks is hindered by the susceptibility of conventional concrete to ultra-low temperature (ULT) cycling down to −70 °C. While redispersible polymer powder (RPP) and polypropylene (PP) fibers individually enhance performance, their combined effect in various mineral admixture systems remains unclear. This study investigates the synergy and selective compatibility in hybrid-modified concrete containing fly ash (FA), silica fume (SF), or slag (SG). Comprehensive assessments after 50 ULT cycles reveal that the efficacy of hybrid modification is intrinsically governed by the mineral admixture. Among all systems, the silica fume-based hybrid system (EPSF) exhibits the highest residual compressive strength (57.5 MPa), the lowest strength loss (6.7%), and the most balanced durability. Microstructural analysis reveals that this synergy arises from a dense matrix, continuous polymer network, and effective fiber bridging—achieved only when the mineral admixture enables uniform RPP distribution. In contrast, the FA system exhibits a strength–durability trade-off, with RPP localized at interfaces, while the SG system shows a polymer-activated hydration mechanism. Microstructural and nano-mechanical analyses confirm that RPP acts as a pore filler in cement, an interfacial modifier in FA, a cohesive network former in SF, and a hydration activator in SG. This work establishes that superior ULT resilience requires not merely additive modifications but a matrix-enabled synergy, providing a scientific basis for the rational design of cryogenic concrete.

Schlagwörter

Stichwörter der Autor:innen

cryogenic durabilityfiber reinforcementmatrix compatibilityredispersible polymer powdersilica fume

Autor:innen und Institutionen

  • School of Architecture and Civil Engineering, Liuzhou Institute of Technology, Liuzhou 545616, China.

ORCID-Profile: Yonggang Deng

Zitieren

APA

Li, Y., & Deng, Y. (2026). Mineral Admixture Governs the Synergy of Polymer and Fibers in Ultra-Low Temperature Concrete. Materials, 19(8), 1541. https://doi.org/10.3390/ma19081541

Vancouver

Li Y, Deng Y. Mineral Admixture Governs the Synergy of Polymer and Fibers in Ultra-Low Temperature Concrete. Materials. 2026;19(8):1541. doi:10.3390/ma19081541

BibTeX
@article{Li2026,
  author = {Li, Yao and Deng, Yonggang},
  title = {Mineral Admixture Governs the Synergy of Polymer and Fibers in Ultra-Low Temperature Concrete},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1541},
  doi = {10.3390/ma19081541}
}
Kostenlos starten →