Effect of Hydrogen Charging Current Density on Hydrogen Trapping Behavior in Cu6.01Ni2.7Mn Steel
Materials · 10.04.2026 · 19 (8) · 1521
DOI: 10.3390/ma19081521 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.04.2026. Verfasst von Wenxue Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan 114051, China. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: General Program of Liaoning Provincial Department of Science and Technology, Liaoning Provincial Department of Science and Technology.
Abstract (Originalsprache)
Copper-containing steel is widely used in ship plates and other marine engineering fields due to its excellent mechanical properties and good weldability. However, in hydrogen-containing media environments, ship plate steel is prone to hydrogen embrittlement during service. Existing research primarily focuses on steel grades with copper content below 3 wt.%, while the diffusion and trapping behavior of hydrogen in ultra-high-copper steel with copper content exceeding 3 wt.% remains unclear. Therefore, this study designed an ultra-high-copper-content steel with a copper content of 6.01% and investigated the diffusion behavior of hydrogen in the test steel under different hydrogen charging current densities through microstructure characterization, slow strain rate tensile testing, electrochemical hydrogen permeation, and internal friction tests. The results indicate that with an increase in hydrogen charging current density, accompanied by a slight degradation in mechanical properties, the irreversible hydrogen trap density increases by 50.7%. A large number of microstructures, such as phase boundaries, grain boundaries, and dislocations, have formed inside the material, which have reversible trapping effects on hydrogen, effectively suppressing the migration of hydrogen in the crystal structure and reducing the embrittlement phenomenon caused by hydrogen. This study expands the application potential of copper-containing steel in the field of ocean engineering, providing an important reference for the future development of high-strength, hydrogen embrittlement-resistant copper steel with ultra-high copper content.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan 114051, China.
- Fushun Special Steel Co., Ltd., Fushun 113000, China.
ORCID-Profile: Wenxue Wang, Jing Guo
Förderung
- General Program of Liaoning Provincial Department of Science and Technology
- Liaoning Provincial Department of Science and Technology
Zitieren
APA
Wang, W., Guo, J., Zhang, J., & Li, L. (2026). Effect of Hydrogen Charging Current Density on Hydrogen Trapping Behavior in Cu6.01Ni2.7Mn Steel. Materials, 19(8), 1521. https://doi.org/10.3390/ma19081521
Vancouver
Wang W, Guo J, Zhang J, Li L. Effect of Hydrogen Charging Current Density on Hydrogen Trapping Behavior in Cu6.01Ni2.7Mn Steel. Materials. 2026;19(8):1521. doi:10.3390/ma19081521
BibTeX
@article{Wang2026,
author = {Wang, Wenxue and Guo, Jing and Zhang, Jian and Li, Lili},
title = {Effect of Hydrogen Charging Current Density on Hydrogen Trapping Behavior in Cu6.01Ni2.7Mn Steel},
journal = {Materials},
year = {2026},
volume = {19},
number = {8},
pages = {1521},
doi = {10.3390/ma19081521}
}
EUVIMED