EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Beverage Immersion and Repolishing on the Color Stability of CAD/CAM Restorative Materials: An In Vitro Study

Umut Dağdeviren iD, Mine Betül Üçtaşlı, İrem Köklü Dağdeviren iD

Materials · 10.04.2026 · 19 (8) · 1519

DOI: 10.3390/ma19081519 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.04.2026. Verfasst von Umut Dağdeviren und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Dentistry, Faculty of Dentistry, Gazi University, Ankara 06490, Türkiye. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Long-term aesthetic success in dentistry largely depends on the color stability of restorative materials. This study investigated the color changes (ΔE00) of resin nanoceramic and lithium disilicate ceramic restorative materials used in computer-aided design and computer-aided manufacturing (CAD/CAM) systems following beverage immersion and after repolishing. One hundred specimens were prepared from lithium disilicate (Initial LiSi Block) and resin nanoceramic (Cerasmart), and polished. The specimens were divided into ten groups according to material and beverage type (n = 10) and immersed in distilled water, cola, tea, coffee, and turnip juice at 37 °C for 3 months. Color values were recorded at baseline, 1 week, 1 month, and 3 months, and after repolishing. ∆E00 values were calculated using the CIEDE2000 color difference formula. Data were analyzed using three-way repeated measures ANOVA and post hoc Tukey and Bonferroni tests (α = 0.05). Material type, beverage type, and immersion time significantly affected color stability (p < 0.05). The highest ∆E00 observed in the resin nanoceramic–tea group at 3 months (ΔE00 = 11.39 ± 1.76). Lithium disilicate demonstrated better color stability. After repolishing, all ΔE00 values were below the clinically acceptable limit (ΔE00 ≤ 1.8). Repolishing may help maintain the long-term aesthetic success of dental restorations in the oral environment.

Schlagwörter

Stichwörter der Autor:innen

CAD/CAMaesthetic propertiescolor changecolor stabilitylithium disilicaterepolishingresin nanoceramicstaining

Autor:innen und Institutionen

  • Department of Restorative Dentistry, Faculty of Dentistry, Gazi University, Ankara 06490, Türkiye.
  • Department of Prosthodontics, Faculty of Dentistry, Gazi University, Ankara 06490, Türkiye.

ORCID-Profile: Umut Dağdeviren, İrem Köklü Dağdeviren

Zitieren

APA

Dağdeviren, U., Üçtaşlı, M. B., & Köklü Dağdeviren, İ. (2026). Influence of Beverage Immersion and Repolishing on the Color Stability of CAD/CAM Restorative Materials: An In Vitro Study. Materials, 19(8), 1519. https://doi.org/10.3390/ma19081519

Vancouver

Dağdeviren U, Üçtaşlı MB, Köklü Dağdeviren İ. Influence of Beverage Immersion and Repolishing on the Color Stability of CAD/CAM Restorative Materials: An In Vitro Study. Materials. 2026;19(8):1519. doi:10.3390/ma19081519

BibTeX
@article{Dadeviren2026,
  author = {Dağdeviren, Umut and Üçtaşlı, Mine Betül and Köklü Dağdeviren, İrem},
  title = {Influence of Beverage Immersion and Repolishing on the Color Stability of CAD/CAM Restorative Materials: An In Vitro Study},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1519},
  doi = {10.3390/ma19081519}
}
Kostenlos starten →