EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization Design of Metakaolin-Based Geopolymer Solidification for Potassium Copper Hexacyanoferrate After Cs+ Adsorption Using Response Surface Methodology

Yuqing Liao, Xingyu Yu, Xinyi Yuan, Jingsong Wang, Yao Yan, Gaoshang Ouyang

Materials · 07.04.2026 · 19 (7) · 1469

DOI: 10.3390/ma19071469 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.04.2026. Verfasst von Yuqing Liao und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, University of South China, Hengyang 421001, China. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study employed a metakaolin-based geopolymer (GP) to solidify potassium copper hexacyanoferrate after its saturation with adsorbed Cs+. The experiment was designed using response surface methodology (RSM) in the Design–Expert 13 software, targeting the compressive strength and cumulative leaching fraction of the solidified form. A regression model was developed to achieve the multi-objective optimization of the comprehensive performance of the GP solidified product. Regression analysis identified the optimal mix proportion as Na2O/Al2O3 = 0.84, SiO2/Al2O3 = 2.8, and H2O/Na2O = 10.23. Under these conditions, the experimentally measured compressive strength was 23.41 MPa. The 42-day cumulative leaching fractions at 25 °C and 40 °C were 7.906 × 10−4 cm and 1.5923 × 10−3 cm, respectively, both significantly below the national standard threshold (Standard Code GB7023-2011) of 2.6 × 10−1 cm. The percentage error remained within 10%, indicating strong agreement with predicted values. These results suggest that metakaolin-based GP exhibits promising potential for the immobilization of radionuclides.

Schlagwörter

Stichwörter der Autor:innen

Csgeopolymermetakaolinresponse surface methodology

Autor:innen und Institutionen

  • School of Civil Engineering, University of South China, Hengyang 421001, China.
  • School of Resource Environment and Safety Engineering, University of South China, Hengyang 421001, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liao, Y., Yu, X., Yuan, X., Wang, J., Yan, Y., & Ouyang, G. (2026). Optimization Design of Metakaolin-Based Geopolymer Solidification for Potassium Copper Hexacyanoferrate After Cs+ Adsorption Using Response Surface Methodology. Materials, 19(7), 1469. https://doi.org/10.3390/ma19071469

Vancouver

Liao Y, Yu X, Yuan X, Wang J, Yan Y, Ouyang G. Optimization Design of Metakaolin-Based Geopolymer Solidification for Potassium Copper Hexacyanoferrate After Cs+ Adsorption Using Response Surface Methodology. Materials. 2026;19(7):1469. doi:10.3390/ma19071469

BibTeX
@article{Liao2026,
  author = {Liao, Yuqing and Yu, Xingyu and Yuan, Xinyi and Wang, Jingsong and Yan, Yao and Ouyang, Gaoshang},
  title = {Optimization Design of Metakaolin-Based Geopolymer Solidification for Potassium Copper Hexacyanoferrate After Cs+ Adsorption Using Response Surface Methodology},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1469},
  doi = {10.3390/ma19071469}
}
Kostenlos starten →