Experimental Study on Rheological, Mechanical Properties and Microstructure of Ultra-High Performance Concrete (UHPC) Mixed with Steel Slag Powder
Materials · 05.04.2026 · 19 (7) · 1463
DOI: 10.3390/ma19071463 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 05.04.2026. Verfasst von Lei Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Hydraulic Engineering, Shaanxi A&F Technology University, Xianyang 712100, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Yangling Vocational & Technical College of China, National Natural Science Foundation of China, Natural Science Foundation of Shaanxi Province of China.
Abstract (Originalsprache)
In order to promote the high-quality utilization of solid waste—steel slag—this study prepared ground steel slag powder with specific surface areas of 400 m2/kg, 500 m2/kg and 600 m2/kg respectively. Different fineness levels of steel slag powder were used to replace cement to prepare ultra-high performance concrete (UHPC), with replacement rates of 20%, 30% and 40% respectively. The effects of fineness and dosage of steel slag powder on the workability, mechanical properties and microstructure of UHPC were further investigated. The results show that the incorporation of steel slag powder can significantly reduce the yield stress and plastic viscosity of UHPC, thereby increasing its fluidity, but also decreasing its thixotropy. The tensile properties of UHPC mixed with steel slag powder were all superior to those of the reference group. The compressive strength of UHPC prepared by using steel slag powder with a specific surface area of 400 m2/kg or 600 m2/kg instead of 20% cement was higher than that of the reference group. The compressive strength of UHPC mixed with 600 m2/kg specific surface area steel slag powder was generally stronger at the same dosage. At the same fineness, the mechanical properties of UHPC decreased gradually with the increase in steel slag powder content. The recommended dosage for the steel slag powder with a specific surface area of 400 m2/kg is 20%, which results in the best comprehensive properties in UHPC. At this time, compared with the reference group, the compressive strength increased by 3.35%, and the tensile strength increased by 20.73%. Moreover, adequate fineness of the steel slag powder can be achieved without excessive grinding energy, which contributes to sustainability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Hydraulic Engineering, Shaanxi A&F Technology University, Xianyang 712100, China.
- Zhuhai Chunhe New Materials Research Institute Co., Ltd., Zhuhai 519000, China.
- College of Civil Engineering, Xijing University, Xi'an 710123, China.
- State Key Laboratory of Water Resources Engineering and Management, Wuhan University, Wuhan 430072, China.
- Hydraulic Concrete Institute, China Three Gorges Corporation, Beijing 100038, China.
ORCID-Profile: Lei Liu, Xinhua Cai
Förderung
- Natural Science Foundation of Yangling Vocational & Technical College of China
- National Natural Science Foundation of China
- Natural Science Foundation of Shaanxi Province of China
- Natural Science Foundation of Shandong Province of China
Zitieren
APA
Liu, L., Chen, H., Cai, X., Cui, J., & Guo, W. (2026). Experimental Study on Rheological, Mechanical Properties and Microstructure of Ultra-High Performance Concrete (UHPC) Mixed with Steel Slag Powder. Materials, 19(7), 1463. https://doi.org/10.3390/ma19071463
Vancouver
Liu L, Chen H, Cai X, Cui J, Guo W. Experimental Study on Rheological, Mechanical Properties and Microstructure of Ultra-High Performance Concrete (UHPC) Mixed with Steel Slag Powder. Materials. 2026;19(7):1463. doi:10.3390/ma19071463
BibTeX
@article{Liu2026,
author = {Liu, Lei and Chen, Hao and Cai, Xinhua and Cui, Jinyang and Guo, Wei},
title = {Experimental Study on Rheological, Mechanical Properties and Microstructure of Ultra-High Performance Concrete (UHPC) Mixed with Steel Slag Powder},
journal = {Materials},
year = {2026},
volume = {19},
number = {7},
pages = {1463},
doi = {10.3390/ma19071463}
}
EUVIMED