EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Temperature Isothermal Oxidation Behavior of Newly Developed Fe–Cr–Ni Austenite Stainless Steel

Mohammed Nawaz Husain iD, Thangam Muniyandi, Bhuvaneshuwari Balaguru, Kamalan Kirubaharan Amirtharaj Mosas iD, Ashok Raja Chandrasekar iD, Dinesh Kumar Devarajan iD

Materials · 05.04.2026 · 19 (7) · 1461

DOI: 10.3390/ma19071461 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.04.2026. Verfasst von Mohammed Nawaz Husain und 5 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Nanoscience and Nanotechnology, Sathyabama Institute of Science and Technology, Jeppiaar Nagar, Rajiv Gandhi Salai, Chennai 600119, India. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Indian Space Research Organisation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One of the significant causes of failure in aerospace engine components is high-temperature oxidation. Therefore, it is necessary to investigate the high-temperature oxidation behavior of newly fabricated structural materials for aerospace components. From this perspective, the isothermal oxidation behavior and kinetics of newly developed stainless steel (SS) 08X14H were investigated at 750, 950 and 1050 °C for up to 100 h in an air environment. The weight results demonstrate that oxidation in 08X14H increases with time and temperature and follows a parabolic rate law. Major spallation was observed in samples oxidized for 100 and 24 h at 950 °C and 1050 °C, respectively. Structural and morphological analysis of oxidized samples through X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) of the surface and cross section reveal the phases present and their distribution. The structural results confirm the formation of Fe2O3, Cr2O3, FeCr2O4 and intermediate (Cr, Fe)2O3 oxides in the oxidized samples. Surface morphologies reveal that the formation of a Cr2O3 layer effectively protects the material from further oxidation. At higher temperatures, the coarsening of Fe2O3 oxides takes place, which leads to the formation of loose and porous oxide scale with stress-induced cracks. The spallation of the outermost Fe2O3-rich oxide scale was observed, and the matrix is exposed during the extreme oxidation at 950 and 1050 °C for 100 and 50 h, respectively. The cross-sectional morphologies and elemental mapping results reveal a duplex oxide layer with an outermost Fe2O3 layer followed by an underlying layer of Cr2O3, (Cr, Fe)2O3 and FeCr2O4 spinel beneath the Fe2O3 layer.

Schlagwörter

Stichwörter der Autor:innen

isothermal oxidation behaviormajor spallationparabolic rate of oxidationstainless steelstress-induced crack

Autor:innen und Institutionen

  • Centre for Nanoscience and Nanotechnology, Sathyabama Institute of Science and Technology, Jeppiaar Nagar, Rajiv Gandhi Salai, Chennai 600119, India.
  • Advanced Characterization Facility, Centre for Advanced Studies, Sathyabama Institute of Science and Technology, Jeppiaar Nagar, Rajiv Gandhi Salai, Chennai 600119, India.
  • Coating Department, FunGlass-Centre for Functional and Surface Functionalized Glass, Alexander Dubcek University of Trencin, 91150 Trencin, Slovakia.

ORCID-Profile: Mohammed Nawaz Husain, Kamalan Kirubaharan Amirtharaj Mosas, Ashok Raja Chandrasekar, Dinesh Kumar Devarajan

Förderung

  • Indian Space Research Organisation

Zitieren

APA

Husain, M. N., Muniyandi, T., Balaguru, B., Amirtharaj Mosas, K. K., Chandrasekar, A. R., & Devarajan, D. K. (2026). High-Temperature Isothermal Oxidation Behavior of Newly Developed Fe–Cr–Ni Austenite Stainless Steel. Materials, 19(7), 1461. https://doi.org/10.3390/ma19071461

Vancouver

Husain MN, Muniyandi T, Balaguru B, Amirtharaj Mosas KK, Chandrasekar AR, Devarajan DK. High-Temperature Isothermal Oxidation Behavior of Newly Developed Fe–Cr–Ni Austenite Stainless Steel. Materials. 2026;19(7):1461. doi:10.3390/ma19071461

BibTeX
@article{Husain2026,
  author = {Husain, Mohammed Nawaz and Muniyandi, Thangam and Balaguru, Bhuvaneshuwari and Amirtharaj Mosas, Kamalan Kirubaharan and Chandrasekar, Ashok Raja and Devarajan, Dinesh Kumar},
  title = {High-Temperature Isothermal Oxidation Behavior of Newly Developed Fe–Cr–Ni Austenite Stainless Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1461},
  doi = {10.3390/ma19071461}
}
Kostenlos starten →